1.
Fiber Bragg Grating Pressure Sensors Based on Thin-wall Strain Canister
基于薄壁应变筒的光纤布拉格光栅压力传感器
2.
Finite Element Simulation of the Thin-wall Hydraulic Cylinder's Clamping Deformation
薄壁液压缸筒夹紧变形的有限元模拟
3.
Unified incremental solution of thin cylinder under step deformation path
薄壁圆筒在阶形变形路径下的统一增量解
4.
The Application of Thin-walled Cast-in-situ Tubular Pile in Soft Foundation Processing
现浇混凝土薄壁筒桩在软土地基处理中的应用
5.
Analysis of Circumferentially Arc Welded Thin-Walled Cylinders to Investigate the Residual Stress Fields
圆弧焊接薄壁圆筒残余应力场的分析研究
6.
Influence of Process Parameters on Ball Spinning of Thin-walled Tube
滚珠旋压工艺参数对薄壁筒形件旋压变形的影响
7.
The Stability Response Study of Cast-in-situ Thin Wall Pot Pile in Dealing with Soft Foundation of Bridges Head;
现浇砼薄壁筒桩处理桥头软基的稳定性响应研究
8.
Mechanism and Application Research on Cast-In-Situ Concrete Thin-Wall Cylindrical Pile for Treating Soft Soil at Bridge Bead
现浇混凝土薄壁筒桩处理桥头软土地基的作用机理与应用研究
9.
Analytical solution in frequency domain of dynamic response of thin-wall pipe piles with variable wave impedance under low strain transient concentrated load
低应变下变阻抗薄壁管桩动力响应频域解析解
10.
The research on the load bearing capacity of wedged-ring joint structure of thin-wall cylinder
薄壁圆筒楔环连接结构承载能力研究
11.
Strain and Stress Relation Until Fracture for Finite Element Simulations of a Thin Circular Plate
薄壁圆板有限元模拟破坏前的应力-应变关系
12.
A New Type of Enthalpy Coating and Its Application in Thin-Wall Casting Process;
新型焓变涂料及其在薄壁件铸造技术中的应用
13.
The Analysis of Distortion、Shear-Lag Effect and Reliability for Thin-Walled Box Girders;
薄壁箱型梁的畸变、剪力滞效应及其可靠性分析
14.
Study of Shear-lag and Distortion for Thin-Walled Curved Grider with Great Initial Curvature;
大曲率薄壁曲线箱梁剪力滞及畸变效应研究
15.
Machining Deformation Analysis of the Thin-walled Structure Components in Aero Industries Based on the Residual Stress;
基于残余应力的航空薄壁件加工变形分析
16.
WIND-INDUCED DYNAMIC RESPONSE OF LARGE THIN-WALLED STEEL TUBE FRAME FOR 1000kV SUBSTATION
1000kV大型薄壁钢管变电构架风致振动响应研究
17.
ENERGY-VARIATIONAL METHOD FOR THE ANALYSIS OF SHEAR LAG EFFECT OF THIN-WALLED I-BEAMS WITH WIDE FLANGE
宽翼薄壁工字形梁剪滞效应分析的能量变分法
18.
The ironing process with thinning in wall thickness and reducing in diameter
壁厚变薄直径缩小空心件的变薄拉深