1.
Ammunition Dimension Measure of Ammunition Preparation Operating System
弹药准备作业系统中弹体尺寸检测的研究
2.
Research on Automatic Measuring System for Projectile Dimension Measurement;
弹体几何尺寸数字化测量系统的研究
3.
Study on the Elastic Constants and Size Effect of Solid Based on Microscopic Particle
基于微观粒子的固体弹性常数及尺寸效应研究
4.
Effect of Shell Sealing on the Response of Small Scale Ammunition in Fast Cook-off Test
壳体密封性对小尺寸弹药快速烤燃响应规律的影响
5.
Taking the body measurement.
提供身体测量尺寸。
6.
Stretch filament socks, availaBle in one size which, however, fits everyone.
弹力长丝无跟袜，只有一种尺寸但伸缩自如。
7.
Specification high elastic average size suitable for everyone.
本品为高弹性均码，适用于所有人群头部尺寸.
8.
Preparation Technology Research of Greate Size Heterogeneous Type Al_2O_3
大尺寸异形Al_2O_3防弹装甲制备技术的研究
9.
Cause Analysis and Improvement Measures of Width Oversize in Hot-rolled Flat Spring Steel
热轧弹扁宽度尺寸超差原因分析及改进措施
10.
The Control of Cylinder Cover Spring Holder Hole Cutting tool and Sinks the Hole Depth Size
气缸盖弹簧座孔刀具与沉孔深度尺寸的控制
11.
full size drawing
原尺寸图，实物尺寸图
12.
foot in the door technique
得寸进尺法得寸进尺法
13.
NOTICE: The dimensions shown on the attached dwgs for ball are the finished (after final machining) dimensions; your rough machined forging must guarantee these final dimensions.
注：附件球体图纸上的尺寸为机加工后的最终尺寸，你们的粗加工锻件必须保证这些最终尺寸。
14.
Take body measurements and select the pattern size based on the following measurements: for the jacket uses the chest measurement, and for the trousers use the hip measurement.
按照如下的方法测体并选择样板尺寸：上装量胸围尺寸；裤子量臀围尺寸。
15.
not thin; of relatively great extent from one surface to the opposite usually in the smallest of the three solid dimensions.
不薄的；从一面到相对面尺寸相对大的，常指立方体中最小的尺寸。
16.
The process of enlarging the size of something, as an optical image
放大放大某一物体的尺寸，如一个光学图像的尺寸
17.
Comparison of the dimensions between Chinese knee joints and five types of knee joint prostheses
国人膝关节尺寸与5种人工膝关节假体尺寸的对照
18.
Analysis of the size effect of crack generation in the large-scale KDP crystals during its growth
大尺寸KDP晶体生长开裂的尺度效应分析