1.
Seismic Design of Weak Connecting Slab in the Structure with Irregular Plane
平面不规则结构中薄弱连接楼板的抗震设计
2.
superimposed floor slab with prestressed concrete thin plate
预应力薄板叠合楼板
3.
A metal sheet or plate connecting the heavier sections, ribs, or flanges of a structural element.
连结板某构造部分的连接较重的部位、助拱或翼椽的金属薄片或板
4.
Seismic behavior of cast-in-place reinforced concrete hollow slab-shear wall joints
现浇空心楼板-剪力墙连接节点抗震性能研究
5.
Study on Behavior of Beam-to-Column Minor-Axis End-plate Connections in Steel Frame
钢框架梁柱弱轴端板连接受力性能研究
6.
The new building was grafted on the old one
新楼与旧楼连接在一起。
7.
Study on Behavior of Extended End-plate Connection Joint with Reduce-beam Section in Beam-to-column Weak-axis Direction
翼缘削弱型外伸式端板连接节点在梁柱弱轴方向的受力性能研究
8.
Floor boarding is laid in varying widths, the individual boards usually being tongued and grooved to one another and nailed to the floor joists.
楼板铺设的宽度是不等的。每条木板通常企口相连接,并钉在楼板梁上。
9.
Estimation of Shear Force of a Super High-rise Holiday Apartment in Dalian Xiaoping Island
十字形平面高层建筑连接部位楼板抗剪估算方法的讨论
10.
The Performance Research on the Beam-column Connections of Cold Bending Light-gauge Steel C Section with Angle at Bottom and Top of the Web;
顶底角钢、腹板双角钢连接的冷弯薄壁C型钢梁柱节点性能研究
11.
The Investigation on Cold-Formed Thin-Walled Steel Beam-Column Joints of Connections with Bolt-Plate;
冷弯薄壁型钢梁柱钢板—螺栓连接节点的影响因素分析
12.
Experimental Research on Cold-Formed Thin-Walled C Steel Beam-Column Joints of Connections with Gusset Plate;
冷弯薄壁C型钢组合梁柱加腋连接板节点试验研究
13.
Experiment Research on Connections of Cold-formed Thin-walled Steel Frame with Double Webs Top and Seat Steel Angle;
带双腹板、顶底角钢连接的冷弯薄壁型钢梁柱节点试验研究
14.
Impact on Load and Finite Element Analysis on Cold-Formed Thin-Walled C Steel Beam-Column Joints of Connections with Plate;
钢板连接对冷弯薄壁C型钢梁柱节点的受力影响及有限元分析
15.
Casting Quality Control for Cast-in-Situ RC Hollow Core Slab
现浇GRF薄壁空心楼板施工质量控制
16.
Experimental Research on Cold Formed Steel-OSB Floor
冷弯薄壁型钢-OSB板楼盖的试验研究
17.
On both the14 th and15 th floors are walkways that connect the three towers.
在14和15楼上是连接三个塔楼的走道。
18.
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
薄板坯连铸连轧（CSP）轧制区组织模拟