1.
No serial device was successfully initialized. The serial driver will unload.
串行设备初始化不成功。串行驱动程序将卸载。
2.
LPC3250 Serial Driver Development Based on WinCE6.0
基于WinCE6.0的LPC3250串口驱动程序开发
3.
CAMAC serial driver
ＣＡＭＡＣ串行驱动器
4.
Specifies the maximum size, in bytes, of the driver's internal input buffer. A value of zero indicates that no maximum value is imposed by the serial provider
指定驱动程序内部输入缓冲区的最大值，单位为字节。零表示串行提供程序没有指定最大值
5.
The Design of Driver for Multi Serial Sharing IRQ Based on VxWorks System
嵌入式VxWorks的多串口共享中断的驱动程序设计
6.
Driver Design of Industrial Controller s Extending Serial Ports and Serial Communication Software Design;
工控机扩展串口的驱动程序及串口通信应用软件的设计
7.
Loading the parallel driver failed.Please uninstall, then reinstall the driver again.
未能加载并行驱动程序。请卸载，然后重新安装驱动程序。
8.
Select the drive on which to run Compression Agent
选择要运行压缩代理程序的驱动器
9.
Unable to run the Add Printer Driver Wizard.
无法运行添加打印机驱动程序向导。
10.
The driver is controlled by the program of MCU.
该驱动器由单片机进行程序化控制。
11.
The drive program design of LCD display module parallel Interface
LCD显示模块并行接口驱动程序设计
12.
The Programme Design of Serial Communication in Windows 9x;
Windows 9x串行通信程序设计
13.
Did not allow upgrade of video driver, not performing reg upgrade
不允许视频驱动程序升级，不执行注册表项升级
14.
Operation cannot be executed because an error occurred during connection to the driver.
在连接驱动程序时发生错误，操作无法被执行。
15.
Add printer drivers and configure as needed
根据需要添加打印机驱动程序并进行配置
16.
Current settings and verified drivers (run time information)
当前设置和经过验证的驱动程序(运行时信息)
17.
"Driver cannot run in Standard mode, requires Enhanced mode.
"驱动程序不能在标准模式下运行，需要增强模式。
18.
Research & Implementation of SHARC Parallel Signal Processor and PCI Device Driver;
SHARC并行处理机及PCI设备驱动程序研究与实现