1.
Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B Joint
Zn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能
2.
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
3.
The Preparation and Research of the Al-Si-Cu-Sn-Zn Multi-Aluminum Solder
Al-Si-Cu-Sn-Zn多元铝基钎料的制备与研究
4.
The Study on Mixture Design of Multiplex Sn-Zn System Lead-free Solder;
多元Sn-Zn系无铅钎料混料设计的研究
5.
Research on the Properties and the Interfacial Reactions of Sn-Zn-Cu(Ni) Lead-free Solders;
Sn-Zn-Cu（Ni）无铅钎料及其钎焊接头界面反应研究
6.
Influence of Cu on Properties of Zn-Al Solders for Al/Cu Brazing
Cu元素对铝/铜钎焊用Zn-Al钎料性能的影响
7.
Effects of different fluxes on the characteristics of Sn-Zn solders
不同钎剂对Sn-Zn系无铅钎料润湿特性的影响
8.
Study on Compressive Creep Properties of the Sn-Zn Lead-free Solder;
Sn-Zn无铅钎料压蠕变行为的研究
9.
The Study of Sn-Ag and Sn-Zn Multi-Composition System Lead-Free Solder Alloys;
Sn-Ag和Sn-Zn系多组元无铅软钎料研究
10.
Investigation on Low Temperature Sn-Zn Base Lead-Free Solder Alloys
低熔点Sn-Zn系无铅钎料的研究
11.
Effects of Alloying Elements on Performance of Sn-Zn Solder
合金化元素对Sn-Zn钎料性能的影响
12.
Investigation on fluxes for Sn-Zn-Al lead-free solder
Sn-Zn-Al无铅钎料的助焊剂研究
13.
Technology of Ultrasonic Brazing of Aluminum by Sn-Zn Solders and Strengthening Mechanism of Joint
Sn-Zn钎料超声钎焊铝合金工艺及接头强化机制研究
14.
Effect of Alloying Elements and Aging on Microstructure and Solder Interface of Sn-Zn Lead-free Solders
合金元素及时效处理对Sn-Zn无铅钎料组织和钎焊界面的影响
15.
Microstructure and mechanical properties of magnesium alloy AZ31B joint brazed with Al-Mg-Zn filler metal
Al-Mg-Zn钎料钎焊镁合金AZ31B接头的显微组织和性能
16.
The Research on Oxidation Resistance and Wettability of Sn-Zn System Lead-free Solder;
Sn-Zn系无铅钎料抗氧化性与润湿性研究
17.
Study of the Effect of CuP14 on Sn-Zn Solder Alloy System;
CuP14合金对Sn-Zn系钎料合金的性能影响研究
18.
Effects of Ga and Al Additions on Corrosion Resistance and High-Temperature Oxidation Resistance of Sn-9Zn Lead-Free Solder
Ga、Al对Sn-Zn钎料耐蚀及高温抗氧化性能的影响