1.
Comparison on Processing of Large Diameter Cylindrical and Grinding Inside Hole with Rolling
大直径外圆和内孔磨削加工与滚压加工的比较
2.
small hole electrical discharge internal grinding machine
电火花小孔内圆磨床
3.
LABORATORIAL RESEARCHING ON GRINDING Empirical Study of ZrO_2 Ceramic Ferrule Bore
二氧化锆陶瓷插芯内孔研磨实验研究
4.
Internal Bore Processing of Precision Miniature Bearings Based on Spark Grinding
基于电火花磨削的精密微型轴承内孔加工
5.
Research on Tribological Properties of Internal Surface on Al_2O_3/TiC/Mo/Ni Composite Ceramic Wire Drawing Die
Al_2O_3/TiC/Mo/Ni陶瓷拉拔模具内孔表面磨损行为
6.
Influencing Factors on the Abrasion of Pipelines in Backfill Drilling and Protective Measures
充填钻孔内管道磨损的影响因素及保护措施
7.
The paper presents a new structure of honing internal_ hole of hydraulic prop on general lathe.
介绍一种在普通车床上珩磨液压支柱内孔的新结构。
8.
Mainly used in the driving of electricity or wind-driver tools,applicable in fine buffing of inner hols orelbow pipes of work pieces.
主要用于电磨机或风动工具上。适用于工件内孔、弯道的精抛等。
9.
Application Study on The Grinding Ti-6Al-4V of Jet Impinging Cooling both in & out to Pore Grinding Wheel
微孔砂轮射流冲击内外冷却技术在钛合金磨削中的应用研究
10.
"To grind an internal surface, a small wheel moves inside the hollow of the workpiece, which is gripped in a rotating chuck."
磨削内圆时,把小砂轮安装成能在工件的内孔中来回运动,工件夹在旋转的夹具内。
11.
Study on Nozzle Wear Mechanism and Drilling Test of Swirling Abrasive Water Jet;
旋转磨料射流喷嘴磨损机理与钻孔试验研究
12.
chuck for grinding hole and end face of bevel gear
磨圆锥齿轮孔和端面用的卡盘
13.
These holes were to be ground smooth, painted, and filled with a rubber plug.
这些孔要磨光，油漆，并塞以橡胶塞。
14.
The Technology of Numerical Control Reconstruction on the Injection Nozzle Center Hole and Inner Cone Grinder;
喷油嘴中孔座面磨床的数控改造技术
15.
Morphology of Physiological Foramen of Mandibular Premolars;
下颌前磨牙生理性根尖孔形态的研究
16.
Research on the Contamination Sensitivity of Cylinder Bore and Piston Pair in Hydraulic Piston Pump;
海水泵缸孔柱塞副污染磨损机理研究
17.
The Influence of "The Mill on the Floss" On "The White Peacock;
论《弗洛斯河上的磨坊》对《白孔雀》的影响
18.
Drilling and forming mechanisms of ground surfaces in engineering ceramics
工程陶瓷的磨削钻孔及表面形成机理