1.
Stability of single-layer reticulated domes with initial imperfection to members
考虑杆件初弯曲的单层球面网壳稳定性能
2.
Research of elastic flexure buckling performance of pre-twisted bar under axial pressure
初始扭转轴压杆弯曲屈曲性能有限元验证分析
3.
ELASTIC FLEXURAL-TORSIONAL BUCKLING BEHAVIOR OF PRE-TWISTED BAR UNDER AXIAL PRESSURE
初始扭转轴压杆弹性弯扭屈曲性能研究
4.
Finite Element Analysis of Derrick Bearing Capacity with Bending Bar
含弯曲杆件的井架承载能力有限元分析
5.
Derivation and Realization on the Stiffness Equation of Uniform Section Bending Bar
等截面弯曲杆件刚度方程的推导和认识
6.
CALCULATING FORMULAS FOR EQUIVALENT STIFFNESS AND STABILITY OF CURVED BAR SIMPLY SUPPORTED AT BOTH ENDS
两端简支弯曲杆件的等效刚度、稳定性计算公式
7.
If we bend a rod, it bends.
如果我们弯曲一个杆，它会弯曲。
8.
Study on Antimicrobial Resisitance of C.Jejuni and Its Related Gene;
空肠弯曲杆菌耐药性及其主要相关基因的初步分析
9.
On Selecting Trial Function of Deflection Curve of the Bars Structure Components;
杆系结构构件挠曲线试函数的选取初析
10.
To make or form an offset in(a wall, bar, or pipe).
做弯曲使在（墙、杆或管子）上形成壁阶或弯曲
11.
Bending deformation：The component bends in one side after welding.
弯曲变形：构件焊后朝一侧弯曲的变形。
12.
A thin supple rod, twig, or stick.
嫩枝细而易弯曲的杆、枝或棍
13.
Inspect for scuffed or bent valve stems.
检视气门杆是否擦伤或弯曲。
14.
Interlaminar Stresses of a Laminated Composite Bar under Bending (Ⅰ)
叠层复合材料杆弯曲的层间应力(Ⅰ)
15.
Study on Longitudinal Natural Frequency of Bended Metallicrod
弯曲金属杆中纵振动固有频率的研究
16.
Effect of bending angle on hydroforming of curved hollow components
弯曲角度对弯曲轴线件内高压成形的影响分析
17.
A curved iron rod with a hooked end used for lifting hot pots, irons, or stove lids.
有钩提锅杆提取热锅、熨斗或炉盖的末端带弯钩的弯曲的铁杆
18.
Analysis of Checkout Error for Distortion and Flexure Caused by Tapers of Crank Bore and Piston Pin Eye
连杆孔锥度造成的弯曲及扭曲检验误差分析