1.
FRACTURE ANALYSIS AND RESEARCH ON EXTRACTIVE CONTROL VALVE STEM OF INDUSTRIAL TURBINE
工业汽轮机抽汽调节阀杆振动断裂原因分析及探讨
2.
Cause Analysis for Governing Valve Level Fall-off in 600MW Steam Turbine
国产600MW汽轮机调节汽门阀杆脱落原因分析
3.
automatic extraction turbine
自动调节抽汽式汽轮机
4.
non-condensing automatic extraction turbine
背压调节抽气式汽轮机
5.
This causes uneven regulation and excessive stem wear.
这将导致调节不均匀和阀杆磨损过度。
6.
Analysis to Operation Mode of 300 MW Air Cooled Turbine Throttle Valve
300 MW空冷汽轮机调节阀运行方式分析
7.
Study in Strength and Stress Monitoring of Valve-body of Turbine Servo;
汽机主蒸汽调节阀阀体强度及应力监测技术的研究
8.
non-automatic extraction turbine
非自动调节抽气式汽轮机
9.
Straight moving type relief valves, mainly valve disc, valve body,, spring-loaded, roof, regulation pole, conditioning nut, and other integral parts.
直动型溢流阀，主要有阀芯、阀体、弹簧、上盖、调节杆、调节螺母等零件组成。
10.
Economical Comparison between Various Extraction Regulating Methods of 210 MW NC Type Steam Turbines
NC型210MW汽轮机抽汽调节方式经济性比较
11.
A valve that regulates the flow of a fluid, such as the valve in an internal - combustion engine that controls the amount of vaporized fuel entering the cylinders.
节流阀调整流体流动的阀门，如内燃机中控制蒸汽燃料进入汽缸的量的阀门
12.
pressure controlled valve
压力调节阀压力控制阀
13.
a pedal that controls the throttle valve.
控制节流阀流量的杠杆。
14.
Disc, the trim part of butterfly valves, rotates with the stem to open/close and modulate the valve.
蝶阀是随阀杆一起转动的蝶板作启闭件，用以实现阀门的开启，关闭与调节。
15.
ANALYSIS OF VIBRATION PROBLEM DURING GOVENOR VALVE SWITCHING IN THE CONTROL MODE OF ONE 600 MW STEAM TURBINE UNIT AND OPTIMIZATION OF ITS STEAM DISTRIBUTION
600MW汽轮机组调节阀控制方式切换中振动问题分析及配汽优化
16.
Numerical Simulations of the Flow Field inside High Pressure Combined Valve of a 600MW Ultra Supercritical Steam Turbine
600MW超超临界汽轮机高压主汽调节联合阀内部流场的数值模拟分析
17.
The Analysis of Load Characteristics About Regulated Extraction Turbine's Peak Regulation in Electric Network
调节抽汽式汽轮机参与电网调峰的负荷特性分析
18.
To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw.
要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。