1.
On-line detection and process control of coating thickness during robotic plasma spraying
机器人等离子弧熔射涂层厚度在线检测与过程控制
2.
Research on the Robotic Spraying Process and Path Planning for Plasma Spray Tooling;
机器人等离子熔射制模工艺研究及轨迹规划
3.
Research on Robotic Path Planning and Spraying Process for Plasma Spray Tooling;
机器人等离子熔射制模路径规划及工艺研究
4.
Intelligent process modeling of robotic plasma spraying based on multi-layer artificial neural network
基于多层ANN的机器人等离子熔射智能化模型
5.
Influence of trajectory parameters on the coating temperature distribution in robotic plasma spraying
机器人等离子熔射路径参数对涂层温度分布影响
6.
Studies on the Jet Fluctuation of DC Arc Plasma Torch;
直流电弧等离子发生器射流脉动的研究
7.
machine tool for working by plasma-arc processes
等离子弧处理加工机床
8.
automatic plasmic arc cutting machine
自动等离子电弧切割机
9.
air plasma water injection arc cutting machine
喷水空气等离子弧切机
10.
The Crystal and Amorphous Phase in Cladding Layer by Compressed Arc Plasma Beam
压缩弧光等离子束熔覆层中晶相与非晶相
11.
Research on Automatic Control System for Keyhole Plasma Arc Welding Penetration;
小孔型等离子弧焊熔透自动控制系统研究
12.
The Three Dimensional Numerical Simulation of Temperature and Fluid Flow Fields of Plasma Arc Welding;
等离子弧焊接熔池流场与温度场三维数值模拟
13.
Detection and Anlysis of Penetration Control Information in Plasma Welding;
等离子弧焊接熔透控制信息检测与分析
14.
The Metal-ceramic Coating Containing TiB_2 of Plasma Transferred Arc Surfacing;
含TiB_2金属陶瓷涂层的等离子弧熔敷合成
15.
Study of Q235 Steel Surface Plasma Cladding Self-adhesive Ni Matrix WC
Q235钢表面等离子弧熔覆自粘结镍基WC的研究
16.
Analysis of microstructure and wear resistance of the white cast iron roll tooth after plasma remelting
白口铸铁磨面辊齿等离子弧重熔组织和耐磨性
17.
Microstructure and high temperature abrasion resistance of Ni-based WC composite layer deposited by plasma arc
镍基WC等离子弧熔敷层的组织和高温磨损性能
18.
Study on mechanical properties of the plasma arc deposition parts
等离子弧熔覆成形零件的力学性能研究