1.
The Fracture Experimental and Finite Element Analysis of the Steel Pipe with Hole
结构钢开孔管断裂试验及有限元分析
2.
openings for pipe connections
用于管子连接的开孔
3.
welded reinforcement of nozzle opening
接管开孔的焊接补强
4.
Design and Development of Φ382 mm Pass of PQF Mill
PQF连轧管机组382mm孔型的设计与开发
5.
Experimental study on desulfurization efficiency in spouted bed with spotting punch draft tube
开孔导流管喷动床脱硫率的实验研究
6.
Experiment of drying rapeseed by spouted bed with a porous branch rotating draft tube
开孔支管旋转导向管喷动床干燥油菜籽试验
7.
STRESS STRENGTH EVALUATION OF REINFORCED STRUCTURE OF THE NOZZLE OF E-330 A PROCESS INLET LINE
E-330A工艺入口管线开孔接管应力强度评定
8.
musculus dilatator pupillae
瞳孔开肌(musculus)
9.
In shape, the suona is conical, with eight holes (seven forward and one at the back).
形制是在椎形木管上开8个按音孔(前7后1)，
10.
Thin Shell Theory Solutions of Two Normally Intersecting Cylindrical Shells for Large Diameter Ratio and Its Verification;
圆柱壳大开孔接管的薄壳理论解及其实验验证
11.
Three-Dimensional FEA of Large Opening Cylinder with Flatting Nozzle;
大开孔率圆柱壳平齐接管结构三维有限元分析
12.
The Design and Development of Data Management System of SAR;
合成孔径雷达地面数据管理系统的设计与开发
13.
Stress analysis of Opening Tubing Connection Zone for High Pressure Vessels Based Finite Element;
基于有限元的高压容器开孔接管区应力分析
14.
The Design and Its Experimental Researcch of a Drill Bit for Down-hole Casing Drilling
石油井下套管开孔钻头设计及试验研究
15.
Investigation on Compression and Bending Behavior of Tubes Filled with Open-cell Aluminum Foam
开孔泡沫铝夹芯管压缩与弯曲力学行为的研究
16.
Application of Hot-tapping and Plugging Technology to Emergency Repair of Heating Pipeline
带压开孔封堵技术在热力管道抢修的应用
17.
Quasi-static compression behaviors of cylindrical tubes filled with open-cell aluminum foam
开孔泡沫铝填充圆管的准静态压缩行为
18.
Thermal Stress Analysis of the Opening Tubing Connection of Steam Header of Boiler in a Power Plants
电厂锅炉集箱开孔接管部位的热应力分析