1.
The Rigidity Analysis in Concrete Pouring Phase and Research on Rigidity in Design for CFST Truss Arch Bridge;
桁式钢管砼拱桥灌注过程刚度分析及设计刚度取值研究
2.
Studying Out-plane Effective Length of the Portal Frame s Beam;
门式刚架斜梁平面外计算长度取值的研究
3.
Rational stiffness of outriggers in high-rise structure with strengthened stories
带加强层高层建筑中加强层刚度的合理取值
4.
Research on Appropriate Stiffness Ratio of Transfer Girder to Bottom Column
转换梁与底部柱线刚度比合理取值研究
5.
Discuss of Stiffness Value of Frame-structure in Calibration of Nonlinear Dynamical Analysis
框架非线性分析中梁柱刚度的取值探讨
6.
Rational ratio of lateral stiffness for frame-supported multi-ribbed slab structure in transfer stories
框支密肋壁板结构转换层刚度比的合理取值
7.
The Research on the Calculate Rigidity of Frame Beam and Amplitude Regulation Coefficient in Reason Value of Bending Moment within Beam End;
框架梁计算刚度与梁端弯矩调幅系数合理取值的研究
8.
I have been spending part of my time tonight in reckoning how I stand.
刚才我盘算了半夜功夫我该取何态度。
9.
Discussion on the Necessity of Eliminating Rigid Add-value Taxes of Mining to Impose Fexible Taxes;
论取消刚性矿业增值税改征柔性税的必要性
10.
We get the maximum enrichment in it by taking just the first bit of vapor that comes off.
取刚刚离开的第一点蒸气，可得到它的最大富集浓度。
11.
In general the bearing will be 'non-linear', the stiffness depending upon the value of h.
通常轴承是“非线性的”，它的刚度随h值而变。
12.
The Numerical Simulation of Small-sized Concrete Block Walls and Stiffness Analysis;
混凝土小型空心砌块墙体数值模拟及刚度分析
13.
The Numerical Analysis of Small Rigidity Stiff Cement-soil Retaining Wall Foundation Pits Supporting;
小刚度劲性水泥土挡墙基坑支护数值分析
14.
A Numerical Analysis of the Vertical Bearing Behavior of Piled Raft Foundations with Variable Pile Stiffness;
变刚度桩筏基础竖向承载性状的数值分析
15.
Simulation Analysis on Effects of Horizontal Stiffness in Lead-Rubber Bearings
铅芯橡胶隔震支座水平刚度影响因素数值分析
16.
Numerical Simulation for the Influence of Spot Welding on the B-pillar Rigidity
焊点对于汽车B立柱刚度影响的数值分析
17.
Three-dimensional FEM Analysis on Flexural Rigidity of Segment Joints in Shield Tunnel
盾构隧道管片接头抗弯刚度的三维数值计算
18.
NUMERICAL PROBLEMS IN DYNAMIC STIFFNESS ANALYSIS OF CONTINUOUS BEAM
连续梁单元动态刚度矩阵数值问题的研究