1.
Analysis of the cutter-head center's location based on actual NC machining of spiral bevel gears
基于实际数控加工弧齿锥齿轮刀盘中心位置分析
2.
Design of the Tool Changer in the Bamboo Hat ATC for Machine Centre
加工中心斗笠式刀库换刀装置的设计
3.
Resolution to the Problem of Tool Disc Changer Lost
加工中心盘式刀库换刀子程序丢失的故障排除
4.
Once the toe setting is correct, the steering wheel can be re-centered by adjusting only the drag link.
如果车轮着地位置设定正确，方向盘仅能通过拉杆来重新进行中心定位。
5.
Knowing where a tool tip is at any time in a program can be very helpful.
随时知道刀尖在程序中的位置是非常有益的。
6.
Represents a single-pole, double-throw switch. Up, down, and center positions can be specified.
表示单刀双掷开关。可指定上、下和中间位置。
7.
Design and Research on Cutter Layout and the Structural Parameters of the Cutterhead Optimization for TBM
TBM滚刀布置与刀盘结构参数优化设计研究
8.
Study of Cutter Layout Design of Full-face Rock Tunnel Boring Machine
全断面岩石隧道掘进机刀盘刀具布置方法研究
9.
the person who plays center field.
在中心位置比赛的人。
10.
off center plan display
偏中心平面位置显示器
11.
A Brief Discussion on Some Breakdowns in Tool Changer of the Numerical-control Machining Center;
数控加工中心自动换刀装置若干故障分析初探
12.
the heart of the Chinese was located in the center, while a Westerner's heart tilted slightly to the left.
中国人的心位置正中，西洋人的心位置偏左；
13.
Common Method for Calculating Both the Borderline of the Plate Cam with a Roller-swinging-follower and the Cutter Central Path
摆动滚子从动件盘形凸轮廓线和刀具中心轨迹的通用算法
14.
The English place the knife in the middle of the plate with its point on the plate and the fork beside it, points turned up.
英国人把刀子放在盘子中央，刀尖在盘上，叉子放在刀子旁边，尖朝上。
15.
When the Abscissor, cutter of life, or killing Planet is on the Ecliptic, and an Infortune in an Angle, the Native will die a violent death.
当命盘中的夺命星位于黄道，且凶星落在盘中四角之一位置时，盘主为暴死之命。
16.
Research on Indexable Form Disc Tools for Helicoidal Workpieces
加工螺旋槽用可转位盘铣刀设计研究
17.
``GROOVE JUMPING'' (BELT DOES NOT MAINTAIN CORRECT POSITION ON PULLEY)
“GROOVE JUMPING（槽跳）”（皮带在皮带盘中不能保持正确的位置）
18.
the teenagers looked on while three men dived repeatedly into the water to locate the dish.
看着3个工人轮潜入水中以确定盘子的位置。