1.
Analysis on Debonding Failure of Sheet-end Interface of Concrete Beams Strengthened with FRP;
FRP加固混凝土梁片材端部界面剥离破坏分析
2.
Study on Debonding Failure in CFRP Flexural Strengthened RC Beams;

碳纤维抗弯加固钢筋混凝土梁的剥离破坏研究
3.
Study on Debonding Failure of Reinforced Layer Strengthened with High Strength Stainless Steel Wire Mesh and Polymer Mortar
高强钢绞线网-聚合物砂浆加固层剥离破坏研究
4.
DEBONDING MODEL OF FRP-TO-BRICK INTERFACE

纤维增强复合材料与砖界面剥离模型
5.
Study on Flexural Behavior and Debonding Failure of CFRP-strengthened RC Beams;

碳纤维片材加固钢筋混凝土梁抗弯性能与剥离破坏研究
6.
Non-linear Finite Element Analysis on the Peeling-Off Failure in Midspan of FRP Strengthened Concrete Beams;
FRP加固混凝土梁跨中剥离破坏的非线性有限元分析
7.
Simulation Study on Non-Destructive Method of Debonding in FRP Reinforcement Elements Based on Fiber-Optic Interferometer
利用光纤干涉仪对FRP加固件剥离破坏的无损检测仿真研究
8.
Research on Strength of RC Beams with Externally Bonded FRP Sheets under Intermediate Flexural-Shear Crack Induced Debonding Failure
FRP加固混凝土梁中弯剪裂缝引起剥离破坏的承载力研究
9.
Cohesive zone modelling of interfacial delamination in PZT thin films

PZT薄膜界面分层破坏的内聚力模拟
10.
Destroy the old world and build a new one.

破坏旧世界, 建设新世界。
11.
The log decrement are suitable for determining interface bond damage.

对数衰减率适宜于测定界面粘结的破坏。
12.
Analysis of Interface Failure of Thermal Barrier Ceramic Coating under Thermo-mechanical Loadings;
热—力联合作用下热障涂层界面破坏分析
13.
Experimental Study of Failure in the Interface of ReinforcedConcrete Beams Strengthened with Continuous Carbon Fiber Sheet;
碳纤维薄板补强钢筋砼梁界面破坏的试验
14.
Theoretical research on the breakage of acoustic wave to the bonded solid-solid interface

声波对固体粘接界面破坏作用的理论分析
15.
Non-linear Finite Element Analysis Model for Steel-plate Strengthened RC Beams Considering Debonding of Plate-concrete Interface
考虑界面剥离的粘贴钢板加固RC梁非线性有限元分析
16.
Debonding interfacial shear stress near crack of RC beam strengthened with CFRP

CFRP加固钢筋混凝土梁裂缝基部剥离界面剪应力分析
17.
By observing the designation number or the wax that does not disturb the surface of he paper ,the pick resistance of paper is determined . This number is called the critical wax number.
观察那一编号的蜡条并不损坏纸的表面,就可确定纸的抗剥性。这个编号称为“临界蜡号”
18.
Spalling was a major form of contact fatigue failures in nitriding steel.

氮化钢的主要接触疲劳破坏形式是剥落。