1.
Liquid-solid Forming Technology of Cored Valve Body with Complex Shape of Aluminum Alloy
复杂结构铝合金空心阀体液-固成形技术的研究
2.
The sectional drawing illustrates the body cavities surrounding the plug. Circulation is provided from the spaces above and below the plug.
断面图说明环绕阀塞的阀体空穴。从阀塞上方和下方空间提供环流。
3.
Smooth operation of throttle linkage and throttle body air valve.
节流连杆和节流体空气阀的平稳操作。
4.
Care should be taken for clearance as the stem rises so that threads are not damaged.
当阀杆上升时,要留心阀杆的上方有足够的空间,防止螺纹受到损坏。
5.
Connect the air inlet hose to the throttle body and the air cleaner.
将空气入口软管接至节流阀体和空气滤清器。
6.
air admission valve
进气阀,真空破坏阀
7.
Apply heat with flame directed away from the center of the valve body. Excessive heat can harm the seats.
在用明火加热时不要直接施加在阀体中心上。过热可能损害阀座。
8.
Explore about Solid Sculpt Design and Demonstrate Cartoon of Vacuum Clique
真空阀立体造型设计及其动画演示的探索
9.
Remove the air inlet hose from the throttle body and air cleaner.
从节流阀体和空气滤清器上拆下气流入口软管。
10.
Metal solid wedge seating against metal seat in body is the most common in building service piping.
金属实心楔板阀座对阀体上的金属阀座这种结构形式在建筑物管道系统中应用最普遍。
11.
Position sensor to throttle body while guiding rubber fitting over throttle body vacuum nipple.
在节气阀体真空管接头上面操纵橡胶管件时，定位感知器至节气阀体。
12.
The vacuum valve opens to admit air.
真空阀开启以补充空气。
13.
Air filtering pressure reducing valve, solenoid valve, valve location feedback device, valve gate locator, quick exhaust valce.
空气过滤器减压阀，电磁阀，阀位反馈装置，阀门定位器,快速排气阀。
14.
Development of the great-flow control valve used for the vacuumpumping water system with multistage centrifugal pumps
用于多级离心泵抽真空吸水系统的大流量控制阀的开发研制
15.
The entire cell aster with the exception of the centrosome.
空心体，吸收体除中心体外的整个星体
16.
Lift out the disc holder assembly from the body of the valve.
从阀门的阀体内提起阀瓣固定器总成。
17.
Remove cap from idle purge fitting at throttle body and install vacuum line.
从节气阀体处的怠速净化装配拆卸帽，安装真空管路。
18.
Tag location for gate and globe valves is typically on the valve yoke or body/bonnet flange.
闸阀和截止阀的标签位置通常在阀门轭架或阀体/阀盖法兰上。