1.
The large scale bend axis piston pump axial setting and pump package centre adjusting method
大型斜轴泵轴线设置与泵组中心调整方法
2.
The trait of the technics technique and equipment consists in the principal axis of grinding head and the axes of workpiece perpendicular disposal.
本工艺和设备的突出特点在于磨头主轴与工件轴线呈垂直布置。
3.
The Research on Dedigns for the Equipment of Autobalancing On-Line at High-Speed Shaft;
高速主轴在线动平衡装置的设计与研究
4.
Axis: An imaginary dividing line around which design elements are located.
轴线:一条虚设的分界线，利用它来确定设计单元的摆放位置。
5.
duplexer of coaxial line system
同轴线收发转换装置
6.
spiral bevel gears with offset axes
轴线偏置螺旋伞齿轮
7.
The Perpendicular Collision of a Particle and a Homogeneous Bar;
小球与轴线位置可变定轴杆垂直碰撞
8.
The plan cross-section throughout the height of the tower is continuously changing.
底部和顶部轴心位置不重合，中轴线倾斜。
9.
Formal balance: Layout pattern that balances elements in exact centre to an imaginable vertical axis.Also called symmetrical balance.
形式化文件:设计图上的各单元格的跟随一虚设的垂直轴线分中放置。也称对称平衡。
10.
The main valve spindle incorporates an inner spindle for double regulation memory stop and valve position setting.
主阀轴配置一个内轴，适用于双重调节止动记忆和阀门位置设置。
11.
Design and Realization of Control System for the Radial-Axial Direction Magnetic Bearing of Permanent Magnet;
永磁偏置径向-轴向磁轴承控制系统设计与实现
12.
bracket incorporating a bearing housing or designed to house a bearing [incorporating ball or roller bearings]
装有轴承座或设计放置一个轴承[装有滚珠或滚柱轴承的托座]
13.
bracket incorporating a bearing housing or designed to house a bearing [not incorporating ball or roller bearings]
装有轴承座或设计放置一个轴承,未装有滚珠或滚柱轴承的托座
14.
chair, incorporating a bearing housing or designed to house a bearing, not incorporating ball-or roller bearings
装有轴承座或设计放置一个轴承,未装滚珠或滚柱轴承的座
15.
Designing of Wheel-Axle Foundation Production Line and Management of Wheel-Axle Information;
货车轮轴基础工艺线设计及轮轴信息化管理
16.
Post processing system design and realization of simultaneous motion of five axes
五轴联动的后置处理系统设计与实现
17.
Design of a Position-Sensorless Controller for Axial Blood Pump;
轴流式血泵无位置传感器控制的设计
18.
The Design and Optimization of a Spindle Grinding Equipment
大型主轴现场修复装置的设计与优化