1.
THE POSSIBILITY OF TAIHU LAKE SILT APPLIED FOR SHEET MOLDING COMPOUND FILLER
太湖淤泥用作片状模塑料填料的探讨
2.
RESEARCH PROGRESSES OF WOODY FILLING/THERMOPLASTIC COMPOSITES
木质填料/热塑性塑料复合材料研究进展
3.
Fillers include modifiers, extenders, plasticizer and low friction additives.
填料包括改性剂，填充剂，增塑剂和低摩擦添加剂。
4.
preformed joint filler
预塑式嵌缝板, 预制填缝料
5.
Behavior Analysis of Isolation Trenches Filled by Foamed Plastic & Cement Clay
泡沫塑料-水泥土充填沟隔振性状研究
6.
Study on Modified Plastic Rheological Property of HDPE/CaCO_3;
改性碳酸钙填充HDPE塑料流变性能研究
7.
Research on Stealth Properties for Rigid Polyurethane Foam Filled by the Pigment
颜料填充硬质聚氨酯泡沫塑料隐身性能的研究
8.
Research on Flowchart Simulation of Filling Process of Plastic Melt in Injection Mould
注塑模塑料熔体填充过程的流程图模拟研究
9.
Fillings: The fillings is new-styled high-efficiency fillings, and the material of the fillings is new PVC engineering plastics, and is shaped through hot plastic pressurization and interlaced.
填料：选用新型高效填料，材质为全新PVC工程塑料，经热塑加压成压，交错排列。
10.
Research on the Composites of Wood-Fiber Filled Thermoplastics and the Extrusion Technique;
木质纤维填充热塑性塑料复合材料与挤出成型的研究
11.
Plastics are classified into two types-thermoplastics and thermosets.
塑料分成两类:热塑塑料和热固塑料。
12.
(dentistry) any of various substances (as metal or plastic) inserted into a prepared cavity in a tooth; an inform British term for `filling' is `stopping'".
填在齿洞中的通常为金属或塑料的各种物质。
13.
Well, rubber and plastics are doing away with fillings, of course.
嗯，像胶或塑料品自然就不需要填充物了。
14.
Numerical Simulation, Optimization and Control of Filling Process in Injection Molding;
塑料注射成型充填过程的数值模拟、优化与控制
15.
The Application of Plastic-Board Drain and Dynamic Consolidation Method for Filled Foundation;
塑料排水板—强夯法在吹填土地基加固中的应用
16.
Symbols of plastics and resins--Part 2: Fillers and reinforcing materials
GB/T1844.2-1995塑料及树脂缩写代号第二部分:填充及增强材料
17.
The Properties of Adhesive and Damp & Heat Aging of Special Adhesive for Plastic Cooling fillers
塑料淋水填料专用粘结剂及其粘结和湿热老化性能
18.
The Mechanism and Action of Filling Disperse Using Foam Oscillated in Foam Plastic;
塑料发泡过程中气泡振动对填料分散的影响和作用机理