1.
Microstructure and properties of AZ31 magnesium alloy by continuous variable cross-section recycled extrusion
连续变断面循环挤压AZ31镁合金的组织与性能
2.
Technology of Producing Refined Grain Materials by Continuous Variable Cross-Section Recycled Extrusion
连续变断面循环挤压制备细晶材料的新方法
3.
Research on Microstructure Properties of Aluminum Processed by Continuous Variable Cross-section Recycled Extrusion;
连续变断面循环挤压技术及纯铝变形组织性能研究
4.
Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Produced by Continuous Variable Cross-section Recycled Extrusion
连续变断面循环挤压AZ31镁合金的微观组织与力学性能
5.
continuous cycle hot plate veneering press
连续循环式热平板单板压机
6.
Study on Lateral Compression Pressing of Tin Bronze for Continuous Extrusion
基于连续挤压的锡青铜侧向挤压研究
7.
Theoretical Research of Groove Deformation Zone of Wide Copper Strip Continuous Extrusion;
宽铜带连续挤压轮槽变形区的理论研究
8.
A surface at which seismic wave velocities change.
不连续面间断面，地震波速度突变面
9.
capillary flow velocity (CFV) and circulatory continuity ratio (CCR) were monitored to study the changes of microcirculation;
检测毛细血管血流速度及微循环灌注连续性比率，探讨微循环改变；
10.
reduction in area
(挤压后) 断面减缩率
11.
In succession or rotation.
轮流连续的或循环的
12.
continuously circulating ropeway
连续循环式架空索道
13.
continuous recirculation lehr
连续循环通风式退火炉
14.
Study on box deep drawing formability of tailor rolling blanks using variable blank holder force
变压边力对连续变截面辊压板成形性能的研究
15.
Contrast analysis of extending forming between continuous extrusion and forward extrusion
连续挤压与正挤压在扩展成形中的对比分析
16.
Heat treatment of steel for extrusion wheel of CONFORM clad machine
连续挤压成型包覆机挤压轮用钢的热处理工艺
17.
Characteristic of microstructure and properties evolution of H65 brass alloy during continuous extrusion process
H65黄铜合金连续挤压过程中的组织和性能演变特征
18.
The Study of PLC Control System in 400 Continuous Extrusion Machine;
400型连续挤压机的PLC控制系统研究