1.
Measures to Thoroughly Solve Leakage at Bottom Flange of PLG Spherical Tank
石油液化气球罐底法兰泄漏的根本解决措施
2.
Research on the Method of Liquid Level Detection of Tanks Based on Lamb Waves;
基于兰姆波的罐体液位检测方法研究
3.
ANALYSIS ON CORROSION LEAKAGE OF LINING FOR ACID LIQUID TANK
酸液罐接管法兰防腐衬里结构的改进
4.
d bottom nozzles flanges from T.L.
顶部与底部接管法兰至切线的高度
5.
Technical standard for external surface cathodic protection of bottom of steel storage tanks
钢制储罐罐底外壁阴极保护技术标准
6.
When the insect gets down to the water,
当小虫飞到罐口准备喝罐底的水时，
7.
Leakage Simulation Test and Calculation of Seepage Quantity of Oil Tank Bottom Plate
油罐罐底渗漏模拟试验及渗漏量计算
8.
Research on Magnetic Flux Leakage Testing Methods for Storage Tank Floors;
基于有限元分析的储罐底板磁性检测与评价方法研究
9.
Analysis on the Breakage Control and Failure of the Global Oxygen Storage Tank Flange
储氧球罐进出气阀对接法兰开裂情况监控及失效分析
10.
Reattach the relief valve hose to the elbow in the bottom flange cover.
重新将安全阀软管接到底部法兰盖内的弯头上。
11.
Filling nozzle is diving bottle to fill and moving up slowly,avoid bubbling.
罐装针头潜入瓶底罐装、缓慢上升、防止气泡。
12.
Recovers tank capacity with no interruption of plant operations.
可以清除罐底，恢复油罐容量，且无须停车。
13.
Research and Application on Detection Technology of Corrosion in Atmosphere Vertical Storage Tank Floor
常压立式储罐罐底腐蚀检测技术的研究与应用
14.
On Arrangement of Inner Tank Bottom Plates and Annular Plates of LNG Low Temperature Storage Tank
LNG低温储罐内罐底板与环板排板的探讨
15.
"and Hadadezer sent for the aramaeans who were on the other side of the River: and they came to Helam, with Shobach, the captain of Hadadezer's army, at their head."
哈大底谢差遣人，将大河那边的亚兰人调来。他们到了希兰，哈大底谢的将军朔法率领他们。
16.
Position the bottom flange cover on the bottom of the relief valve body and secure by hand tightening the four bottom bolts.
将底部法兰盖放在安全阀阀体底部上，用手旋紧四个底部螺栓加以紧固。
17.
This German brandy is made from French grapes, twice distilled in pot stills and aged in oak for8 years.
这种德国白兰地用法国葡萄，罐馏器二次蒸馏，在木桶中陈酿8年，它叫什么名字？
18.
Optional mounting configurations (clamp, flange, plate) and tank sealing solutions (packed, mechanical, lip) are available upon request.
可提供多种安装结构（卡盘式，法兰式，板式）和槽罐密封形式（填料密封，机械密封，油密封）。