1.
Hydrodynamic analysis of a waterjet two-stage axial-flow pump based on CFD
喷水推进双级轴流泵流体动力性能CFD分析
2.
Cause Analysis of Two-grades Axial-flow Primary Fan Blades Drifting
双级轴流一次风机叶片漂移原因分析
3.
" Test methods for centrifugal, mixed flow, axial and regenerative pumps"
GB/T3216-1989离心泵、混流泵、轴流泵和旋涡泵试验方法
4.
The Design and the CFD Simulation Analysis on the Flow Field of the Compressed Stage of the Multiphase Pump;
轴流式混输泵单个压缩级设计及内部流场的CFD模拟分析
5.
Technical specifications for mixed and axial flow pumps
GB/T13008-1991混流泵、轴流泵技术条件
6.
port plate axial piston pump
配流盘式轴向柱塞泵
7.
mid-head axial flow water-turbine pump
中水头轴流式水轮泵
8.
low-head axial flow water-turbine pump
低水头轴流式水轮泵
9.
" NPSH for centrifugal, mixed flow and axial pumps"
GB/T13006-1991离心泵、混流泵和轴流泵汽蚀余量
10.
horizontal single-stage double-suction volute pump
卧式单级双吸蜗壳泵
11.
single-stage double-acting centrifugal fresh water pump
单级双动式离心清水泵
12.
Research on Net-based Modeling of Axial Pump s Impeller and Pump Shaft s Virtual Machining;
轴流泵叶轮网络化建模与泵轴虚拟加工的研究
13.
" Economical operation for industrial centrifugal, mixed flow, axial flow and vortex pump systems"
GB/T13469-1992工业用离心泵、混流泵、轴流泵与旋涡泵系统经济运行
14.
Hemolysis and Flow Field in New Streamlined Axial Blood Pump
流线型轴流血泵内部流场与溶血分析
15.
APPROACHES TO PRODUCING A PULSATILE FLOW WITH LOW TURBULENCE FROM IMPELLER PUMP
轴流泵及离心泵产生低扰动搏动流的方法
16.
3D-PIV Measurements in Clearance between the Impeller and the Diffuser of an Axial Flow Pump;
轴流泵叶轮与导叶轴向间隙内流场的3D-PIV测量
17.
Design and Turbulence Numerical Analysis of Waterjet Axial-Flow Pump;
喷水推进轴流泵设计及紊流数值分析
18.
Study of Numerical Simulation and Experimental Investigation on Clearance Flow in Axial Flow Pump;
轴流泵间隙流动数值模拟与试验研究