1.
Comparative analysis of large-scale high piled beam-slab structure wharfs between mathematical model and physical model
大型高桩梁板式码头数模计算与物模试验比较分析
2.
So, the existed high-piled slab &beam wharf shall he demolished.
为此，需将旧的高桩梁板码头拆除。
3.
Spatial finite element method applied in beam-slab high-pile wharf′s structural design
高桩梁板码头结构设计中的空间有限元分析
4.
Structure Design of the New Integral Box-slab High-pile Wharf;
整体箱板式新型高桩码头的结构设计
5.
Study and Application for Spacial Finite Element Mothod of Piling Wharf Designing;
高桩梁板结构码头设计中空间有限元方法的研究与应用
6.
Finite element analysis on ultimate bearing capacity of high-pile wharf crossbeam
高桩码头横梁极限承载力有限元分析
7.
An innovative scheme of new type wharf structure(The design and construction technique of a piled wharf with monolithic box-slab superstructure)
一种创新的码头结构新型式——整体箱板式高桩码头结构设计与施工技术
8.
With the increase of the pile quantity of wharfs, the dimension of pile caps and the depth-span ratio of beams increase gradually.
港口码头基桩数量的越来越多，导致了高桩码头中桩帽尺寸和梁的高跨比逐渐加大。
9.
Centrifuge modeling for sheet-pile bulkheads with a rigid load-relieving component
整体卸荷式板桩码头结构离心模型试验研究
10.
Study on the Explosive Damage and Emergency Repair Technique of the Pile Wharf with Reinforced Concrete Plate and Beam;
钢筋混凝土桩基梁板码头爆炸毁伤及抢修技术研究
11.
Geotechnical centrifuge model tests of a sheet pile wharf with barrier piles are carried out for optimum design of a deep water sheet pile wharf.
结合某深水泊位板桩码头的优化设计，进行了遮帘式板桩结构码头的土工离心模型试验。
12.
The Mechanical Anslysis for Covered Type of Sheet Pile Wharf and Determination of Rational Pile Spacing
遮帘式板桩码头结构的受力分析及合理桩间距的确定
13.
The standingpile wharf is one of the three major structure forms of the quay, it has been applied quite extensive in our country.
高桩码头是码头的三大结构形式之一,在我国应用相当广泛。
14.
Study on Numerical Simulation of Ship Berthing and Departing in Pile Wharf;
透空式高桩码头船舶靠离泊数值模拟研究
15.
Calculation & Optimization System Exploitation for Pile Pier Structure;
高桩墩式码头结构计算与优化系统的开发
16.
Seismic and Design of Batter Pile Joint That Fabricated by Cast-in-place and Assembling on High-Pile Wharf Structures;
高桩码头整浇装配式叉桩节点抗震性能及设计方法研究
17.
Design and Seismic Behavior of the Integral Casting and Fabricated Vertical Pile Joint on Pile-Wharf Structures;
高桩码头整浇装配式直桩节点抗震性能及设计方法研究
18.
Finite Element Analysis and Design Method Study of the Integral Casting and Fabricated Batter Pile Joint on Pile-Wharf Structures;
高桩码头整浇装配式叉桩节点有限元分析及设计方法研究