1.
Paraffin of High-strengthed Infiltration Materials Based on Rapid Prototyping
基于快速成型石蜡基高强度渗入材料的研究
2.
Manufacturing TiC/Ni_3Al Composites by Using Pressureless Melt Infiltration Processing
无压熔渗法制备TiC/Ni_3Al复合材料的渗入工艺研究
3.
Studies show that water vapor quickly permeates plastic packaging material.
研究证明水蒸汽能迅速渗入塑料封装材料。
4.
Fog: Unintended light penetration of photographic materials.
灰雾:照相材料被光线无意渗入所造成的情况。
5.
Effect of CeF_3 on Manufacturing of TiC/Ni_3Al Composites by Using Pressureless Melt Infiltration Process
CeF_3对无压熔渗法制备TiC/Ni_3Al复合材料的渗入工艺影响
6.
metal-infiltrated porous refractory
渗金属的多孔耐火材料
7.
permeability of tunnel fill material
炮眼充填材料的渗透率
8.
Study on the Fabrication and Properties of MoSi_2/SiC That by Melt Infiltration;
直接浸渗法制备MoSi_2/SiC复合材料及材料性能研究
9.
Permeable sintered metal materials--Determination of fluid permeability
GB/T5250-1993可渗透烧结金属材料流体渗透性的测定
10.
A Study of Combining Treatment of Boriding and Sulphurizing for Cold Work Die Materials
冷作模具材料渗硼+渗硫复合处理的研究
11.
The optimal cement-mixing ratio is 10%, and the additive improves the permeability of cement-treated soil.
认为满足工程应用的最佳水泥掺入比为10%，外掺材料可有效改善水泥土的渗透性。
12.
The rate of flow of a liquid or gas through a porous material.
渗透度，渗透率液体或气体通过渗透材料流的量度
13.
Study TD Method Infiltrating Cr on Hot-Work Die;
热作模具材料TD渗铬处理试验研究
14.
Study of Carbusintering Process of Fe-Ni Alloy Powder Materials;
Fe-Ni合金粉末材料渗碳烧结的研究
15.
Preparation of SiCp/SiC Composite by Chemical Vapor Infiltration;
化学气相渗透法制备SiCp/SiC复合材料
16.
Study on Bonding and Leakproof Technology for Underwater Weapon Composite;
水下兵器复合材料胶接防渗技术研究
17.
STUDY ON PROCESS OF PREPARING A12O3/A1 BY THE PRESSURELESS INFILTRATION TECHNIQUE;
熔渗法制备Al_2O_3/Al复合材料工艺研究
18.
Study on Waterproofing Material Based Sulphoaluminate Cement;
硫铝酸盐水泥基防渗堵漏材料的研究