1.
Remove the trim cap and screw at the upper front corner of the front door trim panel.
拆卸前门饰板上前角的饰帽和螺钉
2.
Front Door Trim Panel Remove/Install Power Window
前门饰板拆卸/安装-手动窗
3.
Safety Performance Analysis and Structural Optimization of Door Trim
门饰板侧碰安全性能分析及结构优化
4.
Install the screws to attach the liftgate trim panel to the liftgate.
安装连接升降闸门饰板到升降闸门的螺丝。
5.
Disconnect the power mirror wire harness retainers from the inner door panel.
从内侧车门饰板断开电动视镜电线束扣件。
6.
Remove the screw located above the front door speaker grille on the front door trim panel.
拆卸位于拆卸前门饰板上前门扬声器风栅上方的螺钉。
7.
Remove the door trim panel as described in Door Module (front door) or Power Window Switch (rear door) in this group.
按本单元的“车门模组”（前车门）或“电动窗开关”（后车门）中所描述的方法拆除车门饰板。
8.
Remove the trim panel from the front door.
从前车门上拆卸饰板。
9.
Remove the door module from the trim panel.
从饰板上拆卸车门模组。
10.
Remove liftgate upper trim panel.
拆去升降闸门上饰板。
11.
UPPER LIFTGATE OPENING TRIM PANEL
上部升降闸门开口饰板
12.
The door was paneled in oak.
那扇门用橡树板装饰。
13.
Remove the screw that secures the right door sill trim and the right cowl side trim to the right door opening sill.
拆下固定右门梁饰板和右仪表板边上饰板于右门通路梁螺丝。
14.
Install the liftgate opening upper trim.
安装升降闸门开口上部饰板。
15.
Position trim panel/cargo lamp at liftgate opening.
将装饰板/载货灯定位至升降闸门开口。
16.
Install door waterdam and trim panel.
安装车门挡水器和装饰板。
17.
Front Door Flag Trim Panel Remove/Install
前车门标记装饰板的拆卸/安装
18.
Remove push-in fastener attaching trim cover to door inner panel (use special tool C-4829).
拆下把装饰盖板固定在车门内板的压入式钩扣（用特殊工具C-4829）。