1.
An Analysis on Hull Girder Shear Strength in Accordance with CSR
满足油船共同结构规范的船体梁剪切强度分析
2.
The Calculation and Analysis on Longitudinal Ultimate Strength of Ship Hull Girder for Bulk Carrier;
散货船船体梁总纵极限强度计算分析
3.
Test method for apparent horizontal shear strength of pultruded glass fiber reinforced plastic rods by the short beam method
GB/T13096.4-1991拉挤玻璃纤维增强塑料杆表观水平剪切强度短梁剪切试验方法
4.
Progressive Collapse Analysis of Ship Hulls under Longitudinal Bending;
逐步破坏法计算船体梁总纵极限强度
5.
testing methods for shear strength of plastics by punch tool
塑料剪切强度试验方法
6.
uniform strain shearing strengh tester
等应变剪切强度测试仪
7.
Comparison of Shear Bond Strength of Orthodontic Resin Brackets under Different Conditions in Vitro;
树脂托槽在不同条件下抗剪切强度的体外研究
8.
Study on Shear Strengths of Rock Structure Planes in Different Shearing Direction by Simulation Experiment
岩体结构面不同剪切方向的抗剪强度模拟试验研究
9.
Experimental Study on Shear Strengthening of RC Beams with CFRP Sheets;
CFRP加强混凝土梁抗剪强度的试验研究
10.
Checking method for ship local strength based on lath-beam assumption
基于板条梁假设的船体局部强度检验方法
11.
Study on Ultimate Strength and Damage Resistance Performance of Ship with Longitudinal Box Girders;
纵向箱型梁船体结构极限强度和抗损性能研究
12.
The Calculation and Parametric Analysis on the Ultimate Longitudinal Strength of Ship Hulls;
船体梁总纵极限强度的计算与参数分析
13.
"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "
剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
14.
Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue
高强度光敏胶拉伸剪切强度测试方法
15.
MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS
高强度钢中绝热剪切带的组织和硬度
16.
The Effect of Green Or～(TM) on the Crown Retention and Shear Bond Strength Using Standardized Tooth Preparations;
牙预备体表面涂布极固宁～（TM）后对其固位力和剪切强度的影响
17.
Comparison of Shear Bond Strength of Resin and Metal Brackets with Different Adhesives in Vitro;
金属托槽与树脂托槽应用不同粘接剂抗剪切强度的体外研究
18.
Analysis on Morphological Characteristics and Strength of Humic Flocs for a Given Shear Rate;
剪切力场下腐殖酸絮凝体形态学特征研究与强度分析