1.
Several typical designs of multipurpose bottle gripping device of case packer
装箱机抓瓶装置一件多用的几种典型的设计方案
2.
A mechanical device for gripping an object.
抓取装置抓东西的一种机械装置
3.
Never tamper with safety devices in valves or cylinders.
禁止堵塞阀门或钢瓶的安全装置。
4.
Gripper: Device on a printing press for holding the sheet.
夹牙:印刷机上用来把纸抓牢的装置。
5.
any of various hooked or U-shaped metallic devices used for gripping or holding heavy objects.
用以抓起重物的钩状或U型金属装置.
6.
Nitrogen cylinders less than 65 inches long use a frangible disc device.
长度小于65英寸的氮钢瓶使用易碎盘装置。
7.
Most cylinders are designed to vent contents when exposed to elevated temperatures.
大多数钢瓶设计了温度升高时的泄压装置。
8.
Intelligence Check Equipment of the Bottle Cork in the Little Dose Leechdom Production Line
小剂量药品生产线瓶塞智能化检测装置
9.
Design of the Image Acquisition Device on Beer Bottle Inspection System
啤酒瓶自动检测系统中图像采集装置的设计
10.
Aircraft battery installed strengths front car start-up optimal design
飞机电瓶起动车前轮收放装置优化设计
11.
A mechanical device that grasps and holds.
夹，钳，夹具能抓牢或握紧的一种机械装置
12.
Mathematical model for calculating effects of target type thrust reverser on turbofan engine performance
抓斗式反推装置打开时反推性能参数计算
13.
Innovated Design of Terminal Capture Device in Module Redocking Mechanism
对接转位机构末端抓手装置的创新设计
14.
PACKING: IN PLASTIC BOTTLE STUFFED WITH PURIFIED WATER, LESS THAN 2 KGS NET WEIGHT FOR EACH BOTTLE, THEN PUT IN IRON DRUM, LESS THAN 20 KGS NET WEIGHT FOR EACH DRUM.
包装：用塑料瓶充纯水保护，每瓶净重不超过2公斤，并置于铁桶中，每桶净重不超过20公斤。
15.
Leaks occurring at the cylinder valve's pressure relief device, diaphragms, or valve to the cylinder connection cannot be repaired.
发生在钢瓶阀门的减压装置、横膈膜或阀门到钢瓶的接头处的泄露不能维修。
16.
The regulators are mainly used in Oxygen, Acetylene, Hydrogen etc. gases decompression. It has the double一 function of reducing steading the gas pressure.
主要用于氧气、炔、气等高压气瓶的减压装置，有降压和稳压两种作用。
17.
Use regulators and pressure relief devices when connecting cylinders to circuits having lower pressure service ratings.
在钢瓶连接到较低额定压力的回路时，使用调整器和减压装置。
18.
Cylinder pressure-relief devices must be maintained in proper operating condition to function correctly.
必须把钢瓶减压装置维持在正常工作状态，以便正确发挥作用。