1.
Thermal effects of gas tungsten arc welding for thick copper plates at different welding condition
不同焊接条件下TIG焊接紫铜厚板的热效应研究
2.
Application of LINGO Optimization Software used in Welded Beam
LINGO优化软件在焊接条设计上的应用
3.
electrode ,metal contact, for welding machines
电焊机金属接点焊条
4.
a narrow strip of welded metal used to join steel members.
焊接金属的窄的长条。
5.
Research on Feasibility of WB36 Steel Welding Process Using Domestic Welding Electrode
国产焊条焊接WB36钢的工艺可行性研究
6.
Study on Iron Based High Temperature Wear Resistance Surfacing Electrode and Welding Process;
铁基高温耐磨堆焊焊条及焊接工艺研究
7.
The electrode classification shall be shown in the Welding Procedure Specification (WPS) and shall be considered an essential welding variable.
焊接工艺规程中应注明焊条类别，并将其视作一重要焊接变素。
8.
AN INVESTIGATION ON THE GASEOUS FLUORIDE IN WELDING FUME OF BASIC ELECTRODE
碱性焊条焊接烟气中氟化物气体的研究
9.
The Numerical Simulation of Low Transformation Temperature Electrodes Welding Residual Stress;
低相变点焊条的焊接残余应力数值模拟
10.
Study on Characteristics of Bainitic Welding Rod for Direct Built-up Welding in Rail
贝氏体焊条直接堆焊修复铁路钢轨特性研究
11.
External characteristic control of SCR arc welding rectifier
晶闸管整流弧焊电源的外特性控制──适用于高纤维素焊条的焊接
12.
The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface.
底板用配套焊条焊接，使复层侧的焊缝与背衬板表面齐平。
13.
Study on the Corrosion Resistance of Carbon Steel Welding Seam Welded by Modified Welding Rod in the Ammonium Sulfite Solution;
改性焊条焊接碳钢焊缝在亚硫酸铵介质中的耐蚀性研究
14.
Cell connectors and terminal post burning must be done in such a manner that there is complete fusion of the post strap top and the cover lead bushing with the connector ring or terminal post.
连接条和接线柱的焊接必须使极柱顶部和盖子的铅衬套与连接条环口或接线柱完全熔焊牢固。
15.
Specification for welding of stainless steel clad steel plate
GB/T13148-1991不锈钢复合钢板焊接技术条件
16.
A bundle of pieces of iron or steel to be welded or hammered into bars.
束铁把铁片或钢片焊接或锻打成条形
17.
Stainless steel wire rods for welding
GB/T4241-1984焊接用不锈钢盘条
18.
Coupled vibration analysis of large size ultrasonic plastic weld dies;
长条形超声塑料焊接模具的振动分析