1.
Fabrication of Thick Metal Micromesh Sieves with High Open Area Using the UV-LIGA Process
UV-LIGA技术制备大厚度高开孔率精细金属网板
2.
Fabrication and Characterization of the Tissue Engineering Scaffolds with High Open Porosity by Supercritical Carbon Dioxide;
超临界CO_2制备高开孔率的组织工程支架材料及性能表征
3.
Discussion on the opening porosity of porous ceramic materials by drainage method
排液法测定多孔陶瓷材料开孔率的探讨
4.
Effect of Porosity Generators on Absorbency Rate Starch-based Superabsorbent
淀粉基多孔高吸水树脂致孔剂对吸液速率影响
5.
Experimental study on desulfurization efficiency in spouted bed with spotting punch draft tube
开孔导流管喷动床脱硫率的实验研究
6.
Rising temperature of casting solution will increase the water flux, porosity and average pore size of PVDF membrane.
制膜液温度升高，得到微孔膜的孔隙率、通量及平均孔径都增大。
7.
The ratio of the diameter of nozzle to the diameter of vessel has greater effect on the distribution area of high stress in plastic deformation stage.
对于均处于塑性阶段的结构而言，开孔率的大小对高应力区的分布范围影响较大。
8.
Laser has been found very efficient in drilling small holes.
人们发现激光用于小孔钻眼效率很高。
9.
Mesoporous Carbon for High Power Supercapacitors
高功率超级电容器用介孔炭电极材料
10.
The Research on the Construction and the Performance of Macromolecule Hole-Opened Type Multi-Hole Material;
高分子开孔型多孔材料结构与性能的研究
11.
Cellular plastics-Determination of volume percentage of open and closed cells of rigid materials
GB/T10799-1989硬质泡沫塑料开孔与闭孔体积百分率试验方法
12.
The Research of n-HAP/PDLLA Composite Scaffolds with Well Interconnected Pores and High Porosity
高孔隙率、高连通性n-HAP/PDLLA复合支架材料研究
13.
Permeable sintered metal materials--Determination of open porosity
GB/T5164-1985可渗性烧结金属材料--开孔率的测定
14.
Devolatilization and Combustion in FBC and the Distributor with Unequal Vent Area Rate
沸腾炉内挥发份燃烧和变开孔率式布风板
15.
Three-Dimensional FEA of Large Opening Cylinder with Flatting Nozzle;
大开孔率圆柱壳平齐接管结构三维有限元分析
16.
Study on heating efficiency of a porous and passive solar collector
一种开孔被动式太阳能集热器热效率的研究
17.
ANALYSIS OF DEFECT LIMIT AND REINFORCEMENT OF THE OPENINGS ON THE FLANGE PLATE OF STEEL REINFORCED CONCRETE COLUMN
型钢混凝土柱翼缘开孔缺损率限值及补强分析
18.
Study on High Resolution Overlapped Subaperture Imaging Algorithm for High Squint Airborne SAR Processing
机载合成孔径雷达大斜视高分辨率重叠子孔径成像算法研究