1.
Relative quantifying technique to measure mass of fission plate in a fission chamber
裂变室镀层质量厚度的相对测量技术
2.
Numerical Calculation of Response-Time Influenced by Silver Plating on Fission Couple
银镀层影响裂变偶响应时间的数值计算
3.
Gettering of TiZrV Coatings on Pipe Inner-Walls of Vacuum System
真空室内表面镀TiZrV抽气层的性能研究
4.
Analysis of reason and controlling method in deformation cracks in basement RC wall in high-rise building
高层地下室RC墙体变形裂缝原因分析及防治措施
5.
Heat treatment of aluminum coating electrodeposited on ferritic stainless steel at room temperature molten salts
铁素体不锈钢室温熔盐镀铝层的热处理
6.
Research Status on Microstructure and Formational Mechanism of GA Coatings
GA镀层微观组织及转变机制研究现状
7.
The Pre-work of Measurement Fission Yields-the Manufacture Minitype Fission Ionizing Chamber
裂变产额测量的前期工作—小型裂变室的研制
8.
The research in laboratory about VES fracturing fluid used in the coal
VES压裂液应用于煤层的实验室研究
9.
The Effect of Deformation and Stress on Mechanical Properties of Electrodeposited Metal
变形及残余应力对金属镀层力学性能的影响
10.
Measurement of 25.5MeV Neutron Fluence Rate With ~(238)U Fission Chamber
~(238)U裂变电离室测量25.5MeV中子注量率
11.
Plating Technology and Properties of Electroless Ni-Mo-P Alloy Coatings
化学镀Ni-Mo-P合金镀工艺及镀层性能
12.
Gold electrodeposit as top coating of artificial jewelry made of copper and copper alloy tarnished because of copper diffusion to gold top deposit.
铜和铜合金饰品表面需镀金，由于铜扩散至镀金层表面，引起金层变色。
13.
Crack Mechanism and Controlling Technique of High-rise Building Basement Wall;
高层建筑地下室侧墙温度裂缝机理及控制技术
14.
Cause Analysis and Reinforcement of Structure Cracks in High-rise Building Basement
高层建筑地下室结构裂缝成因分析与加固处理
15.
Crack control measures for concrete exterior wall of high-rise building basement
浅析高层地下室混凝土外墙裂缝控制技术措施
16.
SOLUTION TO MODEL TEST OF LAYERED FAILURE WITHIN ROCK MASS AROUND DEEP-BURIED TUNNEL
深埋洞室围岩分层断裂现象模型试验解析
17.
Effect of a Laser Discrete Pre-quenched Substrate on the Fracture Behavior of Chromium Coating/45 Steel Substrate under Tensile Load
拉伸载荷作用下基体表层激光离散预处理对铬镀层/45钢基开裂行为的影响
18.
fission fusion fission bomb
裂变 聚变 裂变弹