1.
Effect of water toughening temperature on microstructure and properties of super-high manganese steel with trace boron
水韧处理温度对含硼超高锰钢组织和性能的影响
2.
Effect of Cooling After Rolling on Microstructure and Properties of Ultra High Strength Steel with Boron
轧后冷却对汽车用含硼超高强度钢组织和性能的影响
3.
high manganese steel
高锰合金钢, 高锰钢
4.
Control on microstructure and mechanical properties of ML20MnTiB high strength cold-heading steel
含硼高强度冷镦钢ML20MnTiB组织性能控制
5.
Study on the Hot Stamping Process of High Strength Steel Blanks;
汽车超高强度硼钢板热成形工艺研究
6.
Study on the Microstructure and Properties of ZGMn18Cr2 Superhigh Manganese Steel;
超高锰钢ZGMn18Cr2组织及性能研究
7.
pig iron containing manganese; used as a deoxidizing agent and to raise the manganese content in making steel.
含有锰的生铁，用作除氧剂，用在制钢时提高锰的含量。
8.
Impact toughness in the welding heat affected zone of HSLA steel with boron
含硼低合金高强度钢焊接热影响区冲击韧度
9.
Boric acid for industrial use-Determination of manganese content
GB/T12684.9-1990工业硼酸锰含量的测定
10.
a steel with a relatively large component (10-14%) of manganese; highly resistant to wear and shock.
锰含量相对较高（%）的钢，抗磨损和防震性能好。
11.
Effect of Lanthanum Content on Structure and Properties of High Manganese Steel for Lining Board
镧含量对衬板用高锰钢组织和性能的影响
12.
Investigation of Wear Resistance of Medium Manganese Steel and Forgeability of High Manganese Steel;
中锰钢抗磨性和高锰钢可锻性的研究
13.
Research on the Production and Properties of Boron Steel Produced by Using Pig Iron Containing Boron as Alloying Agent
以含硼生铁为添加剂的硼钢的制备和性能研究
14.
Study on the Surfare Contained Coalt Super-hard High Speed Steel of 20Cr2V2;
20Cr2V2基表面含钴超硬高速钢的研究
15.
Research of Technology on How to Removal Manganese from Groundwater Containing Higher Concentration of Mn～(2+);
某小区高含锰的地下水除锰技术研究
16.
Optimization of Manganese,Silicon and Sulfur Contents in 9SMn28 Free-cutting Steel Based on a CAFE Method
基于CAFE法优化易切削钢9SMn28锰、硅、硫含量
17.
Effect of Mn and Ni Content on Microstructure and Properties of P92 Steel Weld
锰、镍含量对P92钢焊缝组织性能的影响
18.
The results show that good hardenability and the ability of harden quenching appear when Mn content is about 4%～5%.
结果表明,含锰4%～5%的硼白口铸铁具有较好的淬透性和淬硬性。