1.
Impact Analysis of Structural Shape Fatigue Life of Butt Weld between Plates of Unequal Thickness
不等厚板对接焊疲劳寿命结构形状影响分析
2.
Anaysis of Temperature Field and Stress and Streain Field in Dual Beam Laser Welding Different Thickness Plates;
不等厚板双光束激光焊接温度场及应力应变场分析
3.
Laser Welding of Aluminum Alloy with Different Thickness and Numerical Simulation;
不等厚铝合金薄板激光拼焊及数值模拟
4.
Plastic Formability of Tailor-Welded Blanks for High Strength Steel with Different Thickness and Qualities
不等厚异质高强钢拼焊板塑性变形性能研究
5.
Spine-bulk: The thickness of the spine of a book block not including the thickness of the cover boards.
脊厚:书芯厚度,它不包括书皮纸板的厚度。
6.
straight electrolytic (tin) plate
双面等厚镀层镀锡薄钢板
7.
The paper studied and analyzed the interface wave of clad plate explosive welding used average arranging explosive, then put forward the new technology of unequal thickness arranging explosive.
通过对均匀布药工艺下爆炸焊接复合板的界面波形进行理论分析,提出不等厚度布药的新工艺。
8.
In the field of thick board processing, our plasma cutting can not only ensure quality of the product, but take the superiority in term of processing cost.
在厚板加工领域，我们的等离子切割不仅可以保证产品的质量，更在加工成本上占据优势。
9.
Round and square perforation plate screens-Thickness of below 3 mm
GB/T10612-1989板厚筛板
10.
Classification of Foil, Strip, Sheet & Plate by Thickness
不锈钢箔、卷片、片及板之厚度分类
11.
The aluminum sheets cannot be too much thicker than 0.04 inches.
铝板厚度不能超过0．04英寸。
12.
This was rather easy to do, for the paper was not much thicker than pasteboard.
这很容易做，因为纸并不比纸板厚多少。
13.
REASON ANALYSIS ON INCOMPETENT ELONGATION OF LOW-ALLOY MEDIUM PLATE
低合金中厚板延伸率不合的原因分析
14.
Analysis of Unqualified Cause of Thick Gauge High Strength Steel Plate in Ultrasonic Flaw Detection
厚规格高强度钢板探伤不合原因分析
15.
Applying RTM to Resolve the Bending of Thick Rectangular Plates under Hydrostatic Pressure;
功的互等法解静水压力作用下厚矩形板的弯曲
16.
In- situ hollow floor hollow cylinder transverse direction equivalent thickness simplified numerical solution
现浇空心楼板横筒方向等效厚度简化数值解法
17.
Application of Equal Time Mode to Mill Pacing Control in Double Stands Medium Plate Mill
等时间模式在中厚板双机架轧制中的应用
18.
Low-frequency characteristic of ultrasound reflection spectrum from adhesively bonded aluminum plates
等厚铝板粘接件超声反射频谱的低频特征