1.
Method of Collimation and Image Processing Using CCD Pickup Camera in Aperture Measurement
孔径测量中ccd瞄准方法与图像处理
2.
Study on Slender Hole Ultra-precision Measuring System and Precision Analysis;
细长小孔孔径精密测量系统的设计及精度分析
3.
Research on high-precision capacitive automatic measuring system for pinhole diameter
高精度电容式小孔孔径自动测量系统的研究
4.
Phase Unwrapping in Inteferometric Synthetic Aperture Radar;
合成孔径雷达干涉测量中的相位展开
5.
360°Profilometry by Multi-aperture Overlap-scanning Technique;
多孔径拼接技术实现360°面形测量
6.
Research on Measurement for Aperture Jitter of ADC;
模数转换电路中孔径抖动的测量研究
7.
Research of Estimation of InSAR Baseline;
合成孔径雷达干涉测量技术基线估计
8.
Study on Key Techniques for Interferometric Synthetic Aperture Radar Measurement;
干涉合成孔径雷达测量关键技术研究
9.
The measurement of scotopic pupil diameter with noncontact tonometer
非接触眼压计测量暗适应下瞳孔直径
10.
Application of three-dimensinal optical measuring instrument in measurement of small bore diameter
三维光学测量仪在小孔直径测量中的应用
11.
Subaperture stitching interferometry for testing a large hyperboloid
子孔径拼接干涉测量一大口径双曲面(英文)
12.
Comparison of three measurements of pupil size and analysis of pupil size under different conditions
三种瞳孔直径测量方法在不同测量状态下测量结果的比较和分析
13.
diameter and number of hole
喷嘴量孔孔径及数目
14.
"The pin gauges are used to measure the whole distance, the pitch diameter of the thread, etc. Especially, they are suitable for curved groove width measurement."
针规适用于机械加工中孔径、孔距、内螺纹小径的测量,特别适于弯曲槽宽及模具尺寸的测量。
15.
Research on Spaceborne Synthetic Aperture Radar Interferometry Processing Technique;
星载合成孔径雷达干涉测量处理技术研究
16.
Geometrical Approach to Subaperture Stitching Interferometry for Aspheric Surfaces;
非球面子孔径拼接干涉测量的几何方法研究
17.
Study of the Triangulation Method from Airborne Synthetic Aperture Radar Images;
机载合成孔径雷达空中三角测量方法的研究
18.
Study on the Measurement of Roundness and Straightness for the Inner Hole of the Large Diameter Long Pipes;
大口径长管内孔的直线度、圆度测量研究