1.
The higher-order terms arise from nonlinearities and cross-axis sensitivity.
高次项是由外线性和轴间耦合灵敏度所产生的。
2.
Output Circuit of π-TM_(610) Mode Double-Gap Coaxial Cavity Coupled with Coaxial Line
π-TM_(610)模同轴双间隙腔耦合同轴线输出电路
3.
coaxial variable direction coupler
同轴可变定向耦合器
4.
complex coupling
复式联轴器复式耦合
5.
On the Influences of SFD Acting on the Coupled Dual-rotor System
挤压油膜阻尼器对耦合双转子轴间力的影响分析
6.
Research on π Mode Coupling Double-gap Rectangular TM_(310) Cavity Coaxial Line Output Circuit;
π模耦合双间隙矩形TM_（310）腔同轴线输出回路研究
7.
Coupling Researches on Tribological and Dynamical Behaviors of the Crankshaft-Bearing System of Internal Combustion Engines;
内燃机曲轴-轴承系统摩擦学动力学耦合研究
8.
Coupling Research on Tribology, Stiffness and Strength of Crankshaft-bearing System;
曲轴—轴承系统摩擦学、刚度和强度的耦合研究
9.
An enlarged part of a shaft to which another shaft is coupled or to which a wheel or gear is keyed.
轮毂一轴与另一轴耦合处或一轴与机轮或齿轮楔合处的增大部分
10.
Research on Coupled Flexural and Torsional Vibrations of Turbo-generator Shafts;
汽轮发电机组轴系弯扭耦合振动研究
11.
The Nonlinear Analysis of Coupled Bending and Torsion Vibration of Internal Combustion Engine Crankshaft
内燃机曲轴弯扭耦合非线性振动分析
12.
Strength of axial flow blades considering fluid-structure interaction
考虑流固耦合的轴流式叶片强度分析
13.
Coupling Analysis of Dynamics Tribology and Elastic Mechanics for a Crankshaft Bearing System
计入曲轴倾斜时曲轴-轴承系统动力学摩擦学和弹性力学耦合分析
14.
On Coupled Vibrations of Reciprocating Engine Shaft Systems (Part 3) ──Calculation Method of Coupled at Same and Double Frequencies
活塞式发动机轴系耦合振动问题（三）──同频和倍频耦合计算方法
15.
The Mechanism Analysis and Intelligent Diagnosis of Coupling Faults Based on Rotor-Bearing Coupling Dynamic Model;
基于转子—轴承耦合系统的耦合故障机理分析及智能诊断
16.
Thermal-Mechanical Coupled Analysis for Hybrid Ceramic Angular Contact Ball Bearings;
混合陶瓷角接触球轴承的热机耦合分析
17.
coupling that connects two rotating shafts allowing freedom of movement in all directions.
连接两个转轴可以在任何方向自由移动的耦合。
18.
An analysis of the mutual coupling between the coaxial multi-mode horn of two chokes in the near field
同轴双环多模喇叭收、发天线近场耦合特性分析