1.
Compution on Pressure Distribution of Stern Bearing Liquid Film Reckoning in Inclination of Stern Shaft
计入艉轴倾角的船舶艉轴承液膜压力分布计算
2.
Measuring diameter of fore and aft stern tube bearing and bushes.
艉轴管前、轴承与衬套直径测量。
3.
The portion of a ship's stern extending from the water line to the extreme outward swell.
艉突出体，外倾艉端船尾部突出船体水线面到最远的后端突体
4.
Manufacture Process Optimization of C45 Screw Shaft Forgings with Great Section
大截面C45艉轴锻件制造工艺优化
5.
Research and analysis on the stern tube bearing lubrication performance of the propulsion shafting of vessels
船舶推进轴系艉管轴承润滑性能研究与分析
6.
The earth 's axis be titled at an angle of about 231
地轴倾斜成约二百三十一度角
7.
The earth's axis is titled at an angle of about 231.
地轴倾斜成约二百三十一度角。
8.
Study on 2-axis inclinometer based on CANBUS for rotary drilling rig
旋挖钻机用CANBUS双轴倾角传感器的研究
9.
Test on shear band inclination angles in cohesive soils under axisymmetric conditions
轴对称状态下粘性土剪切带倾角试验
10.
Numerical Analysis and Experimental Research on Controllable Mechanical Seal of Stern Shaft;
艉轴可控式机械密封数值分析及试验研究
11.
Numerical Research on Thermal-structure Characteristics for Ship Stern-shaft Mechanical Seals;
船用艉轴机械密封热—结构特性数值分析
12.
Structure and design of new ship stern shaft sealing device
新型船舶艉轴端面密封装置的结构与设计
13.
By analyzing the problems in the existing method of obtaining inclination angle, an new algorithm( step by step optimization) is presented.
还指出了现有求取刀轴倾角方法存在的问题,提出了一种“逐步寻优”求取刀轴倾角的新算法。
14.
(crystallography) having three unequal crystal axes intersecting at oblique angles.
（结晶学）有三个以倾斜的角度交叉的不同晶轴。
15.
Calculation and Design for caster angle of Cardan Shaft in Skew Rolling Mill
斜轧机的万向联结轴倾角的计算与设计
16.
The Design and Implementation of 2-axis Inclinometer Based on AVR Microcontroller
基于AVR单片机的双轴倾角仪的设计与实现
17.
Analysis of the effects of the propeller eccentricity on the intensity,inflexibility and stability of the stem axes;
螺旋桨的偏心对艉轴的强度、刚度和稳定性影响的分析
18.
The X-Y tilt sensor is used for correcting the bias of vertical and horizontal anglecaused by the surplus tilt of vertical axis after the instrument is leveled.
Y倾斜(平度)感器是当仪器整平后，对垂直轴的剩余倾斜值作垂直角和水平角的改正。