1.
Fault Analysis on the Abnormally Large Current on the Protection Zero Line of the Circulatory Pump Motor
循环泵电动机保护零线上反常大电流的故障分析
2.
Circulating Water Pump Motor Dual-speed Transformation of Performance Analysis
发电厂循环水泵电机双速改造效能分析
3.
Both Way for Supply System Control on Hot Water Circulating Pump
热水循环泵双路自动倒电控制系统改造
4.
AN APPROACH TO START-UP MODE WITH CIRCULATORY PUMP FOR ONCE-THROUGH BOILER OF SUPERCRITICAL 600MW UNIT
超临界600MW机组直流锅炉循环泵式起动探讨
5.
Investigations on Running Characteristics of the Mechanically Pumped Cooling Loop for Space Applications;
航天机械泵驱动两相流冷却环路循环特性的研究
6.
reactor recirculation motor generator
反应堆再循环电动发电机
7.
Optimal Design of Impeller of Circulating Pump Alteration for 600MW Generating Units in the Third Electric Power Plant of Harbin
哈尔滨第三发电厂600MW机组循环水泵改造叶轮优化设计
8.
The Technical Analysis for 600MW Unit Circulating Pump Rehabilitation in Harbin Third Electric Power Plant Co., Ltd.
哈尔滨第三发电有限责任公司600MW机组冷却水循环泵改造技术分析
9.
The Analysis on Vibration Characteristics of Thermal Power Plant Circulating Pump and Foundation Structure;
大型火力发电厂循环水泵系统与基础结构振动性能分析
10.
The Study of Circulating-water Pump and Feed-water Pump Economic Operation in a Power Plant;
火电厂循环水泵和给水泵系统经济运行研究
11.
Research of Energy-Saving and Economic Operating of the Water Circulating Pump;
电厂循环水泵的经济运行与节能研究
12.
Application of Inverters in Saving Energy for Circulating Water Pump in Power Plant
变频器在电厂循环水泵改造中的应用
13.
Frequency Conversion Retrofit to 330 MW Wet Cooling Unit Water Circulating Pump
330 MW湿冷机组循环水泵变频改造
14.
The Agglutination Intention’s Analysis on the Driving Gear of Circular Water Pump;
循环水透平泵传动齿轮胶合强度分析
15.
"The water pump, driven by a belt from the engine crankshaft, circulates the cooling liquid between the radiator and engine water jackets."
水泵由发动机曲轴上的皮带驱动,使冷却液在散热器与发动机水套之间循环流动。
16.
coolant pump motor
冷却泵电动机-机床
17.
Research on the Rapid Combustion Cyclic Variation of Electronic Controlled LPG Injection SI Engine
电喷LPG发动机快速燃烧过程循环变动的研究
18.
Introduction to starting-up of 600MW boiler without boiler water circulating pump
600MW超临界锅炉机组无炉水循环泵开机分析