1.
a flat disk placed to prevent leakage.
装上防泄露的扁平凸轮盘。
2.
A DISCUSSION ABOUT POLAR COORDINATE EQUATION OF DISC CAM OUTLINE
关于盘形凸轮廓线极坐标方程的讨论
3.
Motion analysis of disc cam mechanism with rouer follower
滚子从动件盘形凸轮机构的运动分析
4.
Moving Control in Laser Cladding Of Disc Cam
盘形凸轮表面激光熔覆运动控制研究
5.
Research on Oscillating and Translating Flat-bottom Follower Disc CamM echanism
摆动与直动平底从动件盘形凸轮机构
6.
The General Equations of Roller Follower Disc Cam Contour Line
滚子从动件盘形凸轮廓线的通用方程
7.
CAD/CAM System Development of Planner Disc Cam Based on LabVIEW;
基于LabVIEW的平面盘形凸轮CAD/CAM系统开发
8.
The Considering to the Design of the Disk Cam with Direct-Moving-roller Follower;
滚子的直动从动件盘形凸轮机构设计
9.
Drawing the gonglike cam mechanism precisely by applying CAD;
CAD精确绘制盘形凸轮曲线的方法
10.
The Research and Development of Master Production Scheduling under ERP Mode
基于Pro/E的平面盘形凸轮CAD系统研究
11.
Study on disk cam mechanism with arc bottomed translation follower
弧底直动从动件盘形凸轮机构的研究
12.
Parameterized Design of Disk Cam Based on Pro/E Wildfire2.0
基于Pro/E Wildfire2.0的盘形凸轮参数化设计
13.
OIL PUMP AND DISTRIBUTOR DRIVE GEAR INTEGRAL WITH CAMSHAFT
油泵及与凸轮轴集成的分电盘驱动齿轮
14.
Development of Program Drawing the Contour Curve of Plate Cam at the Designated Point with AutoCAD VBA;
定点绘制盘形凸轮轮廓曲线的程序开发
15.
DETERMING THE MINIMAL RADIUS OF BASE CIRCLE OF A CAM WITH TRANSLETINGA POINT FOLLOWER ACCORING TO THE ALLOWABLE PRESSURE ANGLE[α]
按许用压力角(α)确定直动从动件盘形凸轮机构凸轮最小基圆半径
16.
Design for a new type of cam mechanisms-disk cam mechanism with concave arc follower(一)
一种新型凸轮机构——凹圆弧底从动件盘形凸轮机构的设计(一)
17.
The Fix Method of Basic Size of Cam in the Disk Cam Mechanism with Straight Follower
直动从动件盘形凸轮机构中凸轮的基本尺寸确定方法
18.
Derivation of pressure angle formula for disk cam mechanism with convex arc bottomed follower
凸圆弧底从动件盘形凸轮机构压力角公式的推导