1.
The Study on Electro-brush Plating Technics and Performance of Composite Coating with Nanomaterial;
含纳米材料复合镀层电刷镀工艺和镀层性能研究
2.
The Pulse Electronics Brush Plates the Repair Rolling Mill Tooth Wheel Axle to Brush Plates the Craft Practice
脉冲电刷镀修复轧机齿轮轴刷镀工艺实践
3.
Study on the Technics and Corrosion Performances of Brush-Plated SiC/Ni-P Composite Coatings;
电刷镀SiC/Ni-P复合镀层工艺及腐蚀性能研究
4.
Study on Brush Composite Plating Ni-Fe-diamond Technology;
镍铁——金刚石复合电刷镀的工艺研究
5.
Brush Electroplating Repair Technics of Worn Cylinder of Hydraulic Pressure Grab
液压挖掘机磨损柱塞的电刷镀修复工艺
6.
electrochemical etching and replating process
电化腐蚀和电镀工艺
7.
Study on Iron Electroplating and Fe-SiC Composite Electroplating Technics;
电镀铁及Fe-SiC复合电镀工艺的研究
8.
Micro-via Filling and Through Hole Plating in one Process in Vertical Line
垂直电镀线盲孔和通孔同步电镀工艺
9.
Study on Multiple Brush Plating of Ni-P Alloy on the Surface of PA Engineering Plastic
聚酰胺(PA)工程塑料表面刷镀镍磷合金工艺研究
10.
Preparation Technology of Ni/Nano-SiC Composite Coatings Electrodeposited by Electro-Brush Plating;
镍基纳米SiC复合刷镀层的制备工艺研究
11.
In modern operations tin is generally deposited on the steel plate by electrolytic action.
要现代工艺中，一般是用电镀法将锡镀在钢片上。
12.
Researches on Processes of Electroplating Zinc and Cu/Ni/Cr on AZ91D Magnesium Alloy;
AZ91D镁合金电镀锌及铜/镍/铬组合镀层工艺研究
13.
Cupric Sulfate Plating Process Cu-BRITE TFⅡ for Through-Hole and Via Filling Plating
导通孔和通孔填孔镀用的CuSO_4电镀工艺“Cu-BRITE TFⅡ”
14.
Practice of Zinc-Plating Wastewater Treatment at Middle and Small Plating Plants
中小型电镀厂镀锌废水处理的工艺实践
15.
Optimization and structural characterization of Ni-SiC composite electroplating
Ni-SiC复合电镀工艺的优化及镀层结构表征
16.
Electrodeposition Technology and Performance of(Ni-P)-Graphite Composite Coatings
复合电镀(Ni-P)石-墨工艺及镀层性能的研究
17.
Study on Process of Fe-Cr-Ni Eelectroplated Coating and Electrochemical Corrosion Performance
Fe-Cr-Ni电镀工艺和电化学腐蚀研究
18.
Summarizes continuous plating processes for electronic connector assemblies including gold, palladium and, tin plating solutions, properties of the films, and continuous plating equipment.
综述了接插件连续镀金、、的电镀工艺，包括设备、液和镀层性质。