1.
Metallurgy bonding on the fabrication of shaped Al alloy foam
泡沫铝合金异型件形成过程中的冶金结合
2.
Al-Si foam was fabricated by direct melt foaming.
采用熔体发泡法制备泡沫铝硅合金。
3.
Metallurgy Bonding of Closed-cell Aluminum Foam with Aluminum and Aluminum Alloy Plate
闭孔泡沫铝与铝及铝合金覆板的冶金结合
4.
The Wettability Behaviors Research between Al-Ge Alloy and Vesicant of Aluminum Foams
铝锗合金对泡沫铝发泡剂的润湿性研究
5.
Analysis on the Condition of Molding and Characteristic Parameter of Foamed Aluminum Mould;
泡沫铝模具成型条件及表征参数分析
6.
EFFECT OF ALLOYING ON COMPRESSIVE MECHANICAL PROPERTIES OF THE ALUMINUM ALLOY FOAMS;
合金化对泡沫铝压缩力学性能的影响
7.
Study on a New Type of Spherical Pore Al Alloy Foam with Low Porosity and High Strength;
新型球形孔低孔隙率泡沫铝合金制备及相关性能研究
8.
Foaming Behavior and Compression Property of Al-alloy Foams
泡沫铝合金发泡特性及压缩性能的研究
9.
Preparation and Analysis on the Defects of Aluminum foams via Melt-foaming method
熔体发泡法制备泡沫铝合金及其缺陷分析
10.
Study on Preparation of New Type Coated TiH_2 in Aluminum Production;
泡沫铝用新型复合包覆TiH_2发泡剂的制备研究
11.
Effect of Preheating on Cell-structure of Al Alloy Foam Prepared by Two-step Foaming Method
预热对二次泡沫化法制备泡沫铝合金孔结构的影响
12.
Studies on the Dynamic Mechanical Properties and Energy Absorption of Aluminum Alloy Foams
泡沫铝合金动态力学性能及其吸能机理的研究
13.
Deformation of sandwich beams with spherical pore Al alloy foam core in three-point bending
球形孔泡沫铝合金三明治梁的三点弯曲变形
14.
Application of Foamed Alloy Aluminum in the Atmospheric Pressure Transmission Exhaust Silencer;
泡沫铝合金在气压传动排气消声器中的应用
15.
Measurement of Dynamic Compressive Behavior of Aluminum-alloy Foams by Polycarbonate SHPB System
聚碳酸酯SHPB系统测量泡沫铝合金动态压缩性能
16.
Numerical simulation of drainage and solidification processes of foam aluminum alloy
泡沫铝合金析液与凝固过程数值模拟研究
17.
Numerical Simulation of Bubble Size Distribution of 3-dimensional Aluminum Foams in Liquid State
三维液态铝合金泡沫体演化过程中泡径分布的研究
18.
Dynamic Study and Analysis of Aluminum and Aluminum Alloy Melt in the Foaming Process;
铝和铝合金熔体泡沫化过程的动力学研究及分析