1.
Influence of Pressure Condition on Aluminum Alloy Hub during Filling Process of Die Casting
铝合金轮毂压铸充型阶段压力条件的影响
2.
Non-linear Pressure Condition in Filling of Aluminum Alloy Wheel in Low Pressure Die Casting
铝合金轮毂低压铸造充型非线性压力条件
3.
Numerical Analysis for Dynamic Response of Cracked Slope under Hydraulic Pressure
水压力条件下的含裂隙边坡动力响应数值分析
4.
The temperature and pressure condition each other.
温度和压力互为条件。
5.
Conditions of Untaking Strength Proof in the Pressure Testing for Pressure Vessels;
压力容器压力试验时免作强度校核的条件
6.
Technical requirements for hand-held electromagnetic disk used for the presses
GB5093-1985压力机用手持电磁吸盘技术条件
7.
DID THE PRESSURE DROP TO 0 PSI AND A "NO DRIVE" CONDITION OCCUR?
压力是否降至０ＰＳＩ而且条件＂ＮＯ ＤＲＩＶＥ＂出现？
8.
Kinetics Study on CaO Carbonation Reaction at Pressurized Conditions
加压条件下CaO碳酸化反应动力学研究
9.
Pressure Restrictive Conditions of Sequential Hydranlic Circuitry Controlled by Stroke Valves
行程阀控制液压顺序动作回路的压力限制条件
10.
Be able to work under high pressure and time limitation.
能够在高压力下并有时间限制的条件下工作。
11.
Technical requirements for light type safety device used for the presses
GB4584-1984压力机用光线式安全装置技术条件
12.
Technical requirements for induction type safety device used for the presses
GB5092-1985压力机用感应式安全装置技术条件
13.
Analysis of the bearing capacity of the cast-in-place pile with post grouting under different geologic conditions
不同地质条件下后压浆灌注桩承载力分析
14.
Spectral Analysis of Heart Rate Variability and Blood Pressure Variability under Gravitational Stress;
重力应激条件下心率、血压变异性的谱分析研究
15.
Research of Computation and Application of Pressure Continuity under Multiphase Liquid;
多相流条件下压力连续性计算及应用研究
16.
Study on Pressure Control of Soft Rock Laneway at Great Depth Under Complex Stress Condition;
复杂应力条件下深部软岩巷道矿压控制研究
17.
Study of Pressure Behavior and Productivity for Vertical Fractured Well in Complex Conditions;
复杂条件下垂直裂缝井压力动态及产能研究
18.
The Study of Determining Reservoir Pressure under Different Injection-Production Ratio Conditions;
不同注采比条件下油藏压力确定方法研究