1.
Direct Quenching Technical Study of Ti-B Microalloying Low Carbon Si-Mn Steel
Ti-B微合金化低碳Si-Mn钢直接淬火工艺研究
2.
Effect of Rolling-Direct Quenching Parameters on Structure and Properties of Ti-B Microalloying Low Carbon Si-Mn Steel
轧制-直接淬火参数对Ti-B微合金化低碳Si-Mn钢组织和性能的影响
3.
RESEARCH ON TRANSFORMATION OF GRANULAR STRUCTURE IN LOW CARBON Mn-Si STEEL
低碳Mn-Si钢中粒状组织转变研究
4.
Effect of [P] on Fracture of 170 mm×1650 mm Cast Slab of Low Carbon Si-Mn-B Steel
[P]对低碳Si-Mn-B钢170mm×1650mm铸坯断裂的影响
5.
Study on Forming Mechanism of Hot Charging Cracks in C-Mn-Si Low-alloyed Steel
C-Mn-Si系低合金钢热装裂纹形成机理研究
6.
Continuous cooling transformation behavior of low-carbon Mn-Cu-Ti-Nb steel
Mn-Cu-Ti-Nb低碳钢连续冷却转变行为
7.
Method of quantitative electron probe microanalysis on low contents of Si and Mn in steels
GB/T17360-1998钢中低含量Si、Mn的电子探针定量分析方法
8.
Study on Preparation and Performance of Mn -Series Low & Medium Carbon Bainitic Structural Steels;
Mn-系中、低碳贝氏体结构钢的制备与性能研究
9.
Optimization Reasearch on Strength and Toughness of Low Carbon Mn-series Air Cooling Bainitic Steel
低碳Mn系空冷贝氏体钢的强韧性优化研究
10.
Influence of the Finishing Rolling Temperature on Properties of Low Carbon Mn Bainitic Steels
终轧温度对低碳Mn系贝氏体钢性能的影响
11.
Research on the Controlled Rolling and Controlled Cooling Technology for Si-Mn Alloy Spring Steel Strip
Si-Mn合金弹簧钢带控轧控冷工艺研究
12.
Strain-hardening Characteristics of a Cold Rolled C-Si-Mn Dual Phase Steel
C-Si-Mn冷轧双相钢的应变硬化特性
13.
cold-rolled carbon steel
冷轧碳钢, 低碳钢
14.
The Study on High Temperature Deformation Behavior of Si-Mn Hot-rolled Dual-phase Steel;
Si-Mn系热轧双相钢高温变形行为的研究
15.
Determination of Si、Mn?P、Cu?Ni、Cr、S in steel by ICP-AES;
ICP—AES法同时测定钢铁中Si,Mn,P,Cu,Ni,Cr,S的研究
16.
Microstructure and Properties of C-Si-Mn-Cr(Mo) Cold Rolled DP980 Steels
C-Si-Mn-Cr(Mo)系980MPa级冷轧双相钢的组织性能研究
17.
The Effect of Si-Mn-P on Mechanical Property of Cold-Rolled Continuous Annealing IF Steel
Si-Mn-P元素对冷轧连续退火IF钢力学性能的影响
18.
Microstructure and mechanical properties of hot rolled C-Mn-Si TRIP steel based on dynamic transformation
基于动态相变热轧C-Mn-Si系TRIP钢的组织及性能