1.
specified percentage decarburation
规定脱碳率的脱碳层厚度
2.
Model for the distribution of carburized case depth of spur gear in warm forming after car burizing
直齿轮“渗碳-温挤”渗碳层厚度分布模型
3.
Sim? ilarly, an increase in case depth, particularly uneven case depth in case hardening steels, increases warpage on quenching.
与此类似，渗碳层厚度越大，特别是对于渗碳层厚度不一的渗碳用钢，淬火时更易产生翘曲。
4.
Permissible depth of flaw and decarburized layer
裂纹之容许深度及脱碳层
5.
Diameter Tolerance, Ovality and Average Decarburized Layer Depth
直径公差，偏圆度及脱碳层的平均深度
6.
Determination of depth of decarborization of steel
GB/T224-1987钢的脱碳层深度测定法
7.
Simulation Study on Fluidized Bed Carburizing Layer Depth Mathematic Model
流态化渗碳层深度数学模型仿真研究
8.
SiC-HfSi_2-TaSi_2 HIGH TEMPERATURE ANTI-ABLATION COMPOUND COATING ON CARBON/CARBON COMPOSITES
碳/碳复合材料SiC–HfSi_2–TaSi_2抗烧蚀复合涂层
9.
Iron & Low Carbon as Base Metal
低碳钢或铁基层金属
10.
fissured carbonate reservoir
裂缝性碳酸盐岩储集层
11.
Bending of the Carbon-Epoxy 45°Symmetric Angle-Ply Laminates
碳/环氧对称45°斜交铺层层合板的弯曲
12.
Quality Investigation of Ir-PyC-SiC Coating System;
铱—热解碳—碳化硅复合涂层体系质量研究
13.
Advances in Research on High Temperature Anti-oxidation Coatings of C/C Composites
碳/碳复合材料高温抗氧化涂层的研究进展
14.
Surface Compound Treatment of C-N Multi-elements and RE-B-C-N Multi-elements Deep-penetrating
碳氮共渗-深层稀土硼碳氮共渗复合处理
15.
Research on the Preparation of CNTs/WC Powder and Ni Matrix Composite Coating
纳米碳管碳化钨复合粉体及其镍基复合镀层
16.
Layer-by-layer Assembled Glass Carbon Electrode Based on Chitosan and Multiwalled Carbon Nanotubes and Its Application for the Oxidation of H_2O_2
基于层层自组装的{壳聚糖/多壁碳纳米管}_9/玻碳电极电催化氧化H_2O_2
17.
In the stone coal layer and the overlying black shale, there is a pyrite layer.
在石煤层或其上部的碳质页岩中含黄铁矿层。
18.
The Dengying formation encluded carbonate turbidite and gravity sliding layer.
灯影组发育碳酸盐岩浊积岩层和重力滑动层。