1.
Full enclosure to allow gasket to retain positive radial support during loading.
在负载期间，全封闭外科使得垫圈能够保持正轴向支撑。
2.
REACTION SHAFT SUPPORT SEAL RINGS.
从动轴支撑封印环。
3.
stub-supported coaxial
短截线支撑的同轴线
4.
An axis or shaft supporting a rotating part on a lathe.
柄轴，心轴支撑车床旋转部件的轴或杠
5.
Simple support;Resilient support;Adjustable support;Roller support;Anchor
简单支撑点;弹性支撑点;可调支撑点;滚轴支撑点;锚点
6.
Application of the Hydrostatic Bearing Consisting of a Screw-Cork Damper to the Slant Disc Axial Piston Pump
用阻尼螺塞构成的静压支撑在斜盘式轴向柱塞泵中的应用
7.
Experimental study on low-cycle fatigue behavior of welded I-section steel bracing members under constant amplitude reversed cyclic axial loading
焊接工字形钢支撑等幅轴向反复循环荷载下低周疲劳性能试验
8.
"In order to permit the front wheels to swing to one side or the other for steering, each wheel is supported on a spindle which is part of a steering knuckle."
为了使前轮能够在转向时向一侧或向另一侧摆动,每一个车轮由转向节上的主轴来支撑。
9.
a brace that extends from the rear of the keel to support the rudderpost.
从龙骨后部延伸出的支撑舵轴的支柱。
10.
Bushings: Furnishes shaft support at three locations for positive shaft alignment and actuator support.
衬套:在三个位置上配置轴支撑,有利于轴校直和执行机构的支撑。
11.
Bushings (4): Furnishes shaft support at three locations for positive shaft alignment and actuator support.
衬套（4）：在三个位置上配置轴支撑，有利于轴校直和执行机构的支撑。
12.
gimbaled star tracker
万向架支撑星体跟踪仪
13.
free to deflect [unbraced]
自由变位〔无横向支撑〕
14.
The part of a machine shaft or axle supported by a bearing.
轴颈机械的转动轴或轮轴中由轴承所支撑的部分
15.
Worn reaction shaft support seal rings
磨损的从动轴支撑密封环
16.
Secure axle to device.
将车轴固定到支撑设备上。
17.
Remove nut securing pedal shaft in support bracket.
拆卸支撑托架上连接踏板轴的螺帽。
18.
Analysis and Study on Supporting Stiffness of High-speed Spindle System;
高速轴系支撑刚度的计算分析与研究