1.
Influence of Bolt Pretightening Force to GIS Shell Flange Intensity
螺栓预紧力对GIS壳体法兰强度的影响
2.
Analyze on bolt pre-tightening force control methods of Ba-Tong damper
八通缓冲器联接螺栓预紧力控制方法分析
3.
Stress Analysis of Composite Laminate Connected by Preloaded Bolt
复合材料层合板预紧螺栓连接应力分析
4.
Two Ways of Calculating General Pulling Force of Tight Screw Bolt Linking with Beforehand Light Strength and Work Pulling Force;
受预紧力和工作拉力的紧螺栓联接的总拉力的两种计算方法
5.
Studies on the Ways of Calculating General Pulling Force of Tight Screw Bolt Lin king with Beforehand Light Strength and Work Pulling Force;
受预紧力和工作拉力的紧螺栓联接的总拉力计算方法研究
6.
Design Methods for Pre-tightening Forces and Permitted External Forces Acted on a Bolted Joint Based on 3D FEM Computation;
基于有限元计算的螺栓接头预紧力和允许外力设计方法
7.
Experimental Study on Fastening Bolt Axial Force of WSGG Anchor Basted on CFRP Sheet
CFRP波形齿锚具紧固螺栓轴力的试验
8.
High-strength bolts were inserted into the holes and tightened to a high preload level.
把高强度螺栓插入孔洞，同时拧紧螺栓达到高的预加载水平。
9.
Inspect crankshaft, flexplate/flywheel and bolts for damagTighten to correct torque
检查曲轴、活动板/飞轮和螺栓是否松动。拧紧螺栓以校正扭力。
10.
Reliability Analysis of Tightening Bolts with Moment Method and Rotation Angle Method
力矩法、转角法上紧螺栓力矩可靠性分析
11.
The Thermal Stress Analysis on High Pressure SelfTight Seal Device with Shear Bolts
抗剪螺栓高压自紧密封装置的温差应力分析
12.
The Stress Relaxation of Tight Bolt Connection under a High Temperature;
高温环境下紧螺栓联接设计的应力松弛问题
13.
Study on Tightening Moment Test of Joint Bolt in Sandwich of Composites
复合材料夹层连接螺栓拧紧力矩试验研究
14.
tightening bolt
拉紧螺栓，(铁)风口拉杆
15.
Improper bolt tightening procedure.
螺栓拧紧程序错误。
16.
maneton clamp bolt
可拆卸曲柄颊夹紧螺栓
17.
square collar-head set-bolt
方头凸缘端紧定螺栓
18.
" Tolerances for fasteners--Bolts, screws and nuts"
GB/T3103.1-1982紧固件公差螺栓、螺钉和螺母