1.
Research the Influence on Mechanics Performance of Jointing Techniques Parameter
钎焊工艺参数对钎缝组织性能影响的研究
2.
The Comparisons of Brazed Joint Microstructures between Homemade and Imported Brazing Filler Alloy
国产耐热合金钎料与进口钎料焊缝组织对比分析
3.
Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal
两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比
4.
Study on Clearance Filling Ability and Interfacial Structure of 316L Stainless Steel Brazed Joint Using BNi-2+BNi-5 Composite Filler
BNi-2+BNi-5复合钎料钎焊不锈钢填缝能力及其组织性能研究
5.
Microstructure and properties of BCu80Ni5SnTi active filler metal for brazing cubic boron nitride
钎焊立方氮化硼BCu80Ni5SnTi活性钎料的组织与性能
6.
Microstructure and Mechanical Property of Joint by Amorphous Fillers
非晶镍基钎料钎焊接头性能及微观组织的研究
7.
Microstructure of Soldering Joint of Rapidly Solidified Sn2.5Ag0.7Cu Solder Alloy
快速凝固态Sn2.5Ag0.7Cu钎料钎焊接头的显微组织
8.
Study of Melting, Wetting and Interface of SnAgCuGe Solder;
SnAgCuGe钎料组织、熔化、润湿及界面的研究
9.
The Study of Sn-3.0Ag-0.5Cu-XNi Lead-free Solder and Joint Point Microstructure and Property
Sn-3.0Ag-0.5Cu-XNi钎料及焊点组织和性能研究
10.
Structure of brazed joints of TA2/BT20 with Ag-28Cu filler metal
Ag-28Cu钎焊TA2/BT20接头组织分析
11.
Microstructure Transformation during Ramp-up of Weld in Brazing Copper with Cu-P Amorphous Fillers
非晶铜磷钎料升温过程中的组织演变
12.
Solidified structural characteristics of rapid solidified Sn2.5Ag0.7Cu solder alloy
快速凝固Sn2.5Ag0.7Cu钎料合金凝固组织特征
13.
Alloys structure and mechanical properties of SnAgCu solder
SnAgCu系钎料的合金组织和力学性能
14.
Effect of La on Microstructure and Property of Sn3.5Ag0.5Cu Solder
稀土镧对Sn3.5Ag0.5Cu钎料组织性能的影响
15.
Effects of Cerium on Microstructure and Properties of SnAgCu Solders
铈对SnAgCu钎料的显微组织和性能影响
16.
Effect of gallium on microstructure and properties of Ag-Cu-Zn filler metal
镓对AgCuZn钎料组织和性能的影响
17.
Microstructure and Residual Mechanical Property of Thermomechanically-Fatigued Composite Solder Joints;
复合钎料钎焊接头热疲劳显微组织与残余力学性能研究
18.
The Microstructure and Properities of the Joint of Si_3N_4 Ceramics by Au-Ni-V Brazing Alloy;
Au-Ni-V钎料钎焊氮化硅陶瓷接头的组织及性能研究