1.
Analysis of Estimating Ultimate Loading and Static Test of Screw Pile Under Inclined Loading
承压螺旋桩斜向荷载试验与极限荷载判定分析
2.
Estimation of ultimate load for a screw pile under the vertical pressure
竖向承压螺旋桩基础极限承载力判定
3.
Solution of Ultimate Load for Slope and Foundation with Finite Element Lower Bound Limit Analysis Method
边坡与地基极限荷载的下限有限元解
4.
the ultimate bearing capacity of anchorage zone attains 3.07 times as much as its designed load.
索梁锚固区的极限承载力为设计荷载的3.07倍,有一定的安全储备。
5.
Two and Three-dimensional Stability Analyses of Slopes with Local Load on Top Surface(Ⅱ)--Using Upper-bound Method of Limit Analysis
坡顶局部荷载下边坡的二维和三维稳定分析(Ⅱ)——极限分析的上限法
6.
Researches on Critical Edge Load,Critical Load and Ultimate Load of Soil Mass
地基的临塑、界限和极限荷载的探讨
7.
DOMINANT FAILURE MODES OF A TRANSMISSION TOWER AND ITS ULTIMATE CAPACITY UNDER WIND LOAD
风荷载下输电铁塔的失效模式及其极限荷载
8.
Numerical Methods for Limit Analysis and Reference Stress Determination of Structures under Multi-Loading Systems and Their Engineering Applications;
多组载荷下结构极限分析和参考应力确定的数值方法及工程应用
9.
Evaluation of effective prestress force and ultimate load in prestressed concrete beams
既有预应力混凝土梁现存预应力和极限荷载确定
10.
Ultimate flexure load and uncertainty evaluation of semi-rigid base asphalt pavement reinforced by glassgrid
半刚性基层沥青路面弯曲极限载荷的测试与评定
11.
Analysis on the circumscription of the heavy camion and its limited loading
重型载重车辆加载安全区域与极限载荷分析
12.
Limit Load Calculation and Risk Assessment of Buried Pipe;
埋地管道的极限载荷计算与风险评价
13.
Analysis of Beam Elastic-Plastic Limit under Random Loading Effect;
随机荷载作用下梁的弹塑性极限分析
14.
Plastic Limit Load Analysis of the Piping Branch Junctions with Defect Pitting Corrosion
含点蚀缺陷三通管塑性极限载荷分析
15.
Plastic Limit Analysis of Clamped Circular Plate under Linear Distributed Load
固支圆板在线性荷载作用下的极限解
16.
The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method.
用样条有限条塑性铰法分析了板梁的极限荷载。
17.
Upper bound analysis of plastic limit loads on orthotropic structures
正交各向异性结构塑性极限载荷的上限分析
18.
A Finite Element Analysis for Plastic Limit Load of Welded Piping Branch Junctions;
焊制三通管件塑性极限载荷的有限元分析