1.
THE CRITICAL EDGE LOAD OF COMPOSITE GROUND REINFORCED BY STONE COLUMNS UNDER RIGID FOUNDATION
刚性基础下碎石桩复合地基临塑荷载的确定
2.
Researches on Critical Edge Load,Critical Load and Ultimate Load of Soil Mass
地基的临塑、界限和极限荷载的探讨
3.
Critical Strain of Load Instability Under Super-plastical Tensile Test of AZ31 Alloy
AZ31镁合金超塑性拉伸载荷失稳的临界应变量
4.
The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load.
使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。
5.
Plastics doors--Vertical load test
GB/T14154-1993塑料门垂直荷载试验方法
6.
Analysis of Beam Elastic-Plastic Limit under Random Loading Effect;
随机荷载作用下梁的弹塑性极限分析
7.
Study on Inelastic Yield Load of Concrete Filled Steel Tubular Columns
钢管混凝土柱的弹塑性屈曲荷载研究
8.
ELASTICTTY-PLASTICITY ANALYSIS METHOD FOR SQUEEZED BRANCH PILES UNDER LATERAL LOADS
水平荷载作用下支盘桩的弹塑性分析
9.
Plastic Limit Load Analysis of the Piping Branch Junctions with Defect Pitting Corrosion
含点蚀缺陷三通管塑性极限载荷分析
10.
Analysis of horizontal buckling loads of structure with consiering the influence of vertical loads
考虑竖向荷载影响的结构水平临界荷载分析
11.
The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method.
用样条有限条塑性铰法分析了板梁的极限荷载。
12.
Upper bound analysis of plastic limit loads on orthotropic structures
正交各向异性结构塑性极限载荷的上限分析
13.
AN ELASTO-PLASTIC MODEL OF A BAR UNDER CYCLIC AXIAL LOADS
轴向循环载荷下直杆的一个弹塑性计算模型
14.
A Finite Element Analysis for Plastic Limit Load of Welded Piping Branch Junctions;
焊制三通管件塑性极限载荷的有限元分析
15.
Dynamic Buckling of Elastic-plastic Cylindrical Shells under Coupling Loads;
耦合载荷下弹塑性圆柱壳的动态屈曲研究
16.
Elastic-Plastic Analysis of Foundation Settlement Caused by Subway Load;
地铁荷载作用下地基沉降的弹塑性分析
17.
Plastic Limit Analysis of Shallow-spherical Shell under Normal Linear Distributed Load
法向线布荷载作用下扁球壳的塑性极限分析
18.
Elastic-plastic Analysis of Foundation Settlement Caused by Subway Moving Load
地铁移动荷载作用下地基沉降的弹塑性分析