说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 孔压模型
1.
Cyclic-degradation-pore pressure generation model for anisotropic consolidated clay
各向异性固结软粘土的循环软化-孔压模型
2.
Analysis of the Nozzle Model and Hole Model Associated with High-pressure Natural Gas Pipeline Leakage
高压输气管道小孔与大孔泄漏模型的比较分析
3.
Evolution of porosity and pore water pressure of granular materials based on continuum model
基于连续介质模型的颗粒材料孔隙度及孔隙水压力计算公式
4.
A Novel Calculation Method of the Acid Leak-off in the Acid Fracturing;
考虑酸蚀蚓孔效应的酸压滤失模型及应用
5.
Study of the Effect of Capillary Pressure on Permeability;
考虑毛细压差后多孔介质渗透率的分形模型
6.
Pore water pressure-residual strain model of soft clay under traffic loading
交通荷载作用下饱和软粘土孔压-应变分析模型
7.
Study on core function for dynamic pore water pressure developing process model of seashore soft soil
滨海软土动孔压发展模型核心函数研究
8.
Computer Aided Optimum Design of Die Bearing Length and Layout for Aluminium Profile Extrusion
铝型材挤压模工作带长度和模孔配置的优化设计
9.
recess of press ram
压力机滑块上的模柄孔
10.
Selection of Mathematical Model, Analytic Method and Parameter for Pore Pressure on the Earth Dams Built by Dumping Soils into Ponded Water
水中填土坝孔隙压力的计算模型、解析方法与参数选取
11.
The Laboratorial Study and Academic Mathematics Model of a New Pore Water Pressure Instrument;
土壤孔隙水压力检测系统试验研究及关系模型建立
12.
THE OPTIMIZING DESIGN OF THE CYLINDER’S SILENCE-BORE OF THE AIR-CONDITION COMPRESSOR BASED ON THE RESONANCE-SILENCER MODEL
基于共振消音模型的空调压缩机气缸消音孔优化设计
13.
A DYNAMIC BENDING MODEL FOR LARGE DEFLECTION OF INCOMPRESSIBLE SATURATED ORTHOTROPIC POROELASTIC PLATES
饱和不可压正交各向异性多孔弹性大挠度板的动力弯曲模型
14.
Establishment of an animal model of extra vertebral foramen cervical nerve entrapment by local electrical stimulation with different stimulation parameters
不同电刺激参数致颈神经椎孔外卡压动物模型的建立
15.
The Flat-die Hole Structure Analysis and Simulation of Biomass Briquetting Equipment Based on Pro/Mechanica
基于Pro/Mechanica的生物质挤压设备平模成型孔结构分析及仿真
16.
MODEL TEST AND ANALYSIS OF EXCESS PORE WATER PRESSURE PRODUCED BY DRIVING PILE GROUP
群桩沉桩引起的超孔隙水压力的室内模型及试验分析
17.
steam cored mold
蒸气加热孔道的模型
18.
Finite Element Analysis of Forward Extrusion Cavity Die for Deep Hole and Thin Wall Shell
深孔薄壁件正挤压凹模的有限元分析