1) ACR copper tubes
ACR铜管
1.
The structure and mechanical property of the ACR copper tubes in the process of the PSW(Planetary Shrarge Waltwerk)three-roll planetary mills were analyzed by using tensile test and metallographic microscope examination.
运用拉伸力学性能测试、金相显微镜对PSW(PlanetaryShrargeWaltwerk)三辊行星轧制过程中ACR铜管的组织性能进行了分析。
2) ACR copper tube
ACR紫铜管
1.
Microstructure and properties of ACR copper tube during three-roll planetary milling process;
三辊行星轧制过程中ACR紫铜管的组织和性能演变
3) copper tube
铜管
1.
FEM simulation of the optimization of the die angle with the floating plug drawing process of copper tubes;
铜管游动芯头拉拔模具角度优化的有限元模拟
2.
Research on the Influence of Sewage on Copper Tube Corrosion When Reclaiming Heat Energy From Sewage;
回收污水热能时污水对铜管腐蚀的影响研究
3.
Development of a Special Polish-grinding Machine for Outside Surface of a Crystallizer Copper Tube on Conticaster;
连铸机结晶器铜管外表面抛磨专机研制
4) copper pipe
铜管
1.
Influence of fulvic acid on soluble copper release in soft water from copper pipe/phosphate system.;
软水中富里酸对铜管/磷酸盐体系溶解性铜释放影响
2.
Modeling decay of chloramines residuals by copper pipe distribution test loop system;
铜管模拟输配系统中氯胺衰减过程与模拟
3.
Rational design of copper pipe in building water supply;
铜管在建筑给水中的合理设计
5) copper tubes
铜管
1.
Protective measures of copper tubes of the steam condenser in steam power plants;
火力发电厂凝汽器铜管保护
2.
To simulate ammonia corrosion process of copper tubes in the air removal section of condenser in power plant,immersion tests of copper tube samples are conducted in ammonia solutions with ammonia 50～20000 mg/L,at temperatures 25℃、35℃ and 45℃ respectively.
在 16种浓度的氨溶液 (从 5 0mg/L～ 2 0 0 0 0mg/L不等 )、3种温度 (2 5℃、35℃、4 5℃ )、3种溶解氧的条件下(开口、密闭不除氧、密闭除氧 ) ,对铜管腐蚀过程及影响氨腐蚀过程的因素及规律进行了研究 。
3.
By studying on the lubricity,adhesion,anti-heating and removing properties of the studied lubricants,a new high-speed cold drawing and heavy viscosity oil for copper tubes was developed,which avoids to produce harmful oil-smog,prevents copper tubes from being spoiled and ensures copper tubes have excellent surface quality.
通过对油品的润滑性、粘附性、耐高温性、清洗性等进行详细的研究,开发出一种新型的高粘度铜管高速拉拔外模专用油,不仅解决了铜管生产过程中油烟对工作环境污染和对人体的伤害,而且避免了铜管表面的擦伤,保证了铜管良好的表面质量。
6) ACR resin
ACR树脂
1.
The influence of rubber phase on impact property of ACR resin;
橡胶相对ACR树脂抗冲性能的影响
2.
Preparation and application of impact ACR resin;
抗冲型ACR树脂的制备与应用
3.
ACR resin with multi-layer core-shell construction was synthesized by multi-stage emulsion polymerization.
采用多步乳液聚合方法合成多层核壳结构的ACR树脂。
补充资料：铜管
分子式：
分子量：
CAS号：
性质：又称紫铜管。有色金属管的一种。是压制的和拉制的无缝管。重量较轻，导热性好，低温强度高。常用于制造换热设备（如冷凝器等）。也用于制氧设备中装配低温管路。直径小的铜管常用于输送有压力的液体（如润滑系统、油压系统等）和用作仪表的测压管等。
分子量：
CAS号：
性质：又称紫铜管。有色金属管的一种。是压制的和拉制的无缝管。重量较轻，导热性好，低温强度高。常用于制造换热设备（如冷凝器等）。也用于制氧设备中装配低温管路。直径小的铜管常用于输送有压力的液体（如润滑系统、油压系统等）和用作仪表的测压管等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条